Other sanding accessories
In the miscellaneous sand ing accessories category, you will find a variety of practical tools and aids that will make your sanding projects even more efficient and precise. These complementary products are specially designed to maximise the versatility of your sanding machines and optimise your work.
Whether for removing paint, refining surfaces or reaching hard-to-reach areas, the right accessories make all the difference. With these accessories, you can improve the performance of your sanders while taking your results to the next level.
Important products in this category:
-
Sanding aids for precise details
-
Polishing and finishing products for the finishing touches
-
Dust extraction and filters for clean working environments
Why these accessories are indispensable:
-
Increase sanding performance with additional tools
-
Versatile applications on various materials
Festool HighPower BP 18 Li 5.0 HP-ASI battery pack
Compact power for maximum performance The Festool BP 18 Li 5.0 HP-ASI battery combines modern high-power cell technology with a compact design. Despite its low weight, the powerful 18-volt lithium-ion battery delivers an impressive power supply for demanding applications in trade, on construction sites and in industry. This allows users to benefit from high endurance and, at the same time, optimum handling during daily work. The battery pack has been specially developed for the Festool 18-volt system and ensures a reliable power supply for a wide range of cordless tools. The intelligent electronics monitor key operating data and support a constant power output. This allows tools to reach their full potential and work efficiently even during prolonged use. benefits Powerful 18V HighPower lithium-ion battery 5.0 Ah capacity for long runtime Compact and lightweight design Optimal weight-to-power ratio Compatible with Festool 18V cordless tools Robust housing for daily professional use Reliable power supply even under heavy load Contents 1 piece
Schuller Corkpad 60x100mm abrasive cork
CORKPADSanding cork with sharp edges for precise sanding in the cornersPAD sanding blocksThis category includes all hand tools for the abrasive range, such as cork blocks, sanding blocks and hand sanders.
Festool Protector PR ETSC 2 125 - 578092
FunctionsProtects the workpiece and sanding disc.Our protector specially designed for the ETSC 2 125 not only protects your workpiece directly at the edge, but also your sanding disc. Especially when sanding close to the edge, the Protector D125 helps you to work safely and quickly. Protect the edge of your workpiece with our Protector D125 and save yourself tedious reworking. The Protector material leaves no abrasion marks, wear on the sanding disc is significantly reduced and durability is extended as a result.Safe and fast sanding right up to the edgeProtects edges and sanding discPrevents wear and reworking
Festool Protector PR ETSC 2 150 - 578093
FunctionsProtects the workpiece and sanding disc.Our protector specially designed for the ETSC 2 150 not only protects your workpiece directly at the edge, but also your sanding disc. The Protector D150 helps you to work safely and quickly, especially when sanding close to the edge. Protect the edge of your workpiece with our Protector D150 and save yourself the hassle of reworking. The Protector material leaves no abrasion marks, wear on the sanding disc is significantly reduced and durability is extended as a result.Safe and fast sanding right up to the edgeProtects edges and sanding discPrevents wear and reworking
Scotch-Brite™ flap brush PF-ZS, brown, 76.2 mm, 45 mm, 6 mm, A VFN
DetailsThree-dimensional Scotch-Brite™ nylon fibre fleeceIntegrated shaftUnique cut & polish materialLamellar constructionLevelling a stitch pattern on metallic surfacesRemoval of surface defectsConsistently reproducible work resultUniform workpiece surface without chatter marksUniform finishNo change to the workpiece geometryMetallically clean surfaceTime and cost savingsThe three-dimensional fibre fleece of the Scotch-Brite™ flap brush CB-ZS ensures consistent results without damaging the workpiece. Thanks to the soft, flexible flap construction, an even surface is produced without chatter marks. The 6 mm shaft is used for direct mounting on flexible shafts, straight grinders and drills. No additional accessories are required.Removal of surface defects, levelling of a line pattern on metallic surfaces
Scotch-Brite™ Radial Bristle Brush BB-ZB with plastic flange, yellow, 152.4 mm x 12.7 mm x 25.4 mm, P80, type C
DetailsType A: Most aggressive version with angled bristles Type C: Most flexible version with C-shaped bristles for particularly demanding workpieces Type S: More aggressive version with straight bristlesFor applications in hard-to-reach areasIdeal for cleaning and light deburring applicationsConsistent work results throughout the entire service lifeSolid plastic brush with ceramic gritUse on robotic system, bench grinder, straight grinder or flexible shaftThe Scotch-Brite™ Radial Bristle Brush BB-ZB is an all-plastic brush with ceramic grit that offers consistent results throughout its lifetime. They are ideal for cleaning and light deburring applications. Due to their design, they are very suitable for hard-to-reach areas and for removing tough coatings such as sealants.Scotch-Brite™ Bristle products offer a high degree of flexibility and durability. The ceramic abrasive mineral bonded in plastic guarantees the best sanding results. The unique design also adapts to highly profiled contours, does not clog and ensures a consistent finish. Unlike wire brushes, no individual wires can come loose and endanger the user. Cleaning, blending, deburring and polishing - Scotch-Brite™ Bristle products offer maximum work safety, flexibility and service life at all times. Expert tip: Pay attention to the application pressure during use. Work with little pressure and allow the bristle end to work. Light contact with the workpiece is sufficient. Excessive pressure drastically reduces the service life.
Scotch-Brite™ Radial Bristle Brush RB-ZB with plastic flange, blue, 152.4 mm x 11.11 mm x 25.4 mm, P400, type C
DetailsMost flexible version with C-shaped bristles (type C) for particularly demanding workpiecesFor applications in hard-to-reach areasIdeal for cleaning and light deburring applicationsConsistent work results throughout the entire service lifeSolid plastic brush with ceramic gritUse on robot system, sanding block, straight sander or flexible shaftThe Scotch-Brite™ Radial Bristle Brush BB-ZB is an all-plastic brush with ceramic grit that offers consistent results throughout its lifetime. They are ideal for cleaning and light deburring applications. Due to their design, they are very suitable for hard-to-reach areas and for removing tough coatings such as sealants.Scotch-Brite™ Bristle products offer a high degree of flexibility and durability. The ceramic abrasive mineral bonded in plastic guarantees the best sanding results. The unique design also adapts to highly profiled contours, does not clog and ensures a consistent finish. Unlike wire brushes, no individual wires can come loose and endanger the user. Cleaning, blending, deburring and polishing - Scotch-Brite™ Bristle products offer maximum work safety, flexibility and service life at all times. Expert tip: Pay attention to the application pressure during use. Work with little pressure and allow the bristle end to work. Light contact with the workpiece is sufficient. Excessive pressure drastically reduces the service life.
Qblades sanding sheets for UN65 sanding fingers
The sanding sheets can be used in combination with the UN51 and SC51 sanding fingers on your machine.Content20 sanding sheets
Contents: 20 piece (€0.27 / 1 piece)
Sanding mat 123x98x12mm - soft foam - 2-sided
Description Thanks to the 2-sided direct coating of the soft pressure-distributing foam, the KA.EF. EF. 100 mats are ideal for universal processing of curves, edges, recesses, radii and surfaces - in dry and wet sanding - for simple sanding.Area of applicationFine sanding of wood, varnish, paint, filler, filler, plastic, composites, RubberContents50 sanding matsDimensions123x98x12mmGrit sizesK60=P150K80=P180K100=P220K120=P240K150=P280K180=P320K220=P500K280=1000Explanation: Due to the use of foam as a backing material, the grit size and the resulting sanding pattern differ. We therefore specify Grit=scattered grit and sanding pattern=corresponds approximately to the result of sandpaper (e.g. grit 100=approx. P 220). Please check for yourself. A small amount of grain breakage is normal. Workpieces must be cleaned after processing.
Contents: 50 piece (€0.60 / 1 piece)
Sanding sponges 100x70x25mm - medium-strength foam - 4-sided
Description Thanks to the 4-sided direct coating of the medium-strength pressure-distributing foam, the KA.EF. EF. 100 sponges are ideal for universal processing of rebates, edges, surfaces and radii. Very good sanding results are also achieved for fine and intermediate sanding of paint defects, paint runs, dirt inclusions, orange peel, dust inclusions, etc. in dry and wet sanding.Area of applicationFine sanding of wood, lacquer, paint, filler, filler, plastic, composites, metal, LeatherContents50 sanding spongesDimensions100x70x25mmGrit sizesK60=P150K80=P180K100=P220K120=P240K150=P280K180=P320K220=P500K280=1000Explanation: Due to the use of foam as a backing material, the grit size and the resulting grinding pattern differ. We therefore specify Grit=scattered grit and sanding pattern=corresponds approximately to the result of sandpaper (e.g. grit 100=approx. P 220). Please check for yourself. A small amount of grain breakage is normal. Workpieces must be cleaned after processing.
Contents: 50 piece (€0.60 / 1 piece)
3M™ Abrasive sponge, 68 mm x 100 mm x 26 mm, A, soft, fine, four-sided
Details2-sided sponges=silicon carbide4-sided sponges=aluminium oxidePolyurethane foamThe sanding sponge (hard) is ideal for manual processing of surfaces due to its high edge strength. It can be used for dry and wet sanding.3M™ standard sponge for sanding curved furniture parts. Our thin, flexible and adaptable sanding sponges are available in three silicon carbide grits.
Contents: 24 piece (€0.98 / 1 piece)
Mirka sanding mat 120 x 98 x 13 mm
PropertiesThe sanding mat is coated with sandpaper on 2 sides. It is suitable for processing small areas that cannot be reached with a machine or similar.Grit sizesP100, P180, P220.Scope of delivery100 pieces
Contents: 100 piece (€1.01 / 1 piece)
Mirka protective cover 81x133mm. 54-hole 5 pcs.
FeaturesProtective pad, suitable for GRIP sanding discs, extends the service life of the sanding disc.Dimensions81x133mm, 54 holesPackaging unit5 pieces
Contents: 5 piece (€6.17 / 1 piece)
Mirka Roundy Kit
FeaturesThe Roundy is a practical hand block with suction for Ø 150 mm discs and is particularly suitable for painting and drywall construction. All in one box: The Roundy Handbolock with suction hose and Abranet discs in three different grit sizes. In combination with a Mirka industrial hoover and Abranet, optimum extraction is guaranteed.Scope of deliveryHand block with suction unitSuction hose with conical adapterAbranet discs 5x P120, 5x P180, 5x P240
Mirka NET INTERFACE 225mm SPACER (225mm) P1. 10/pack
PropertiesThis type of soft pad enables the use of non-woven products on power tools.The mesh soft pad makes the use of velour on a non-woven product superfluous and thus enablesthe use of Mirlon and Mirlon Total as discs or sheets in machine sanding.Content10 pieces
Contents: 10 piece (€9.29 / 1 piece)
Mirka sealing pad 150mm without perforation
PropertiesThe sealing pad should be used if the dust extraction system cannot be disconnected during wet sanding. The sealing pad protects the sanding machine and the dust extraction system as it prevents moisture from entering the sanding machine.Content- 5 pieces
Contents: 5 piece (€4.82 / 1 piece)
Mirka protective cover 150mm 67L
FeaturesProtective pad, suitable for GRIP sanding discs, extends the service life of the sanding disc.Ø 150 mm, 67-hole. Suitable for sanding discs and abrasives with 6-hole, 6+1-hole, 9-hole, 15-hole and Abranet.
Mirka hand block for 150 mm grip - 8390330111
FeaturesAn ergonomic sanding block that is sized to fit in the hand. For use with sanding discs Ø 150 mm with Velcro.Content1 piece
Mirka sanding sponge 100 x 70 x 28 mm
FeaturesThe sanding sponge is coated on 4 sides with sandpaper.It is suitable for working on small areas that cannot be reached with a machine or similar.Package contents 100 pieces
Contents: 100 piece (€0.80 / 1 piece)
Sanding sponges 115 x 140mm INDASA Rhyno Sponge Sanding Pads
Areas of application: The Indasa Sponge Sanding Pads are high-quality sanding sponges measuring 115 x 140 x 5 mm. They are suitable for both dry and wet sanding by hand. Can be used for finishing wood, lacquer and filler as well as for working on contours, edges and other hard-to-reach areas.We offer the sanding sponges in microfine (P1200 - 1500), superfine (P500 - 600), fine (P 320 - 400) and medium (P 120 - 180).Content 20 piecesFor more information, please refer to the technical data sheet.
Contents: 20 piece (€1.26 / 1 piece)
Festool sandpaper 230x280 GR/10 Garnet
Robust hand-sanding pad for heavy-duty work The Festool Granat sandpaper (230 × 280 mm) is a high-performance hand-sanding pad for demanding sanding jobs requiring high material removal. It is ideal for quickly working on wood, paint residues, filler and coated surfaces. The sandpaper is part of Festool’s high-quality system and has been developed for professional applications in the trades, interior fit-out and industrial manufacturing. Advantages Very high material removal rate thanks to coarse grit Ideal for pre-sanding and removing old coatings Consistent sanding performance across the entire surface Robust and durable for intensive hand use Versatile for use on wood, paint and filler Perfect for preparing surfaces for further sanding or painting Contents of pack 10 pieces
Contents: 10 piece (€0.94 / 1 piece)
Festool Protector PR ETS-R 125 - 201690
Safe sanding without damaging delicate surfaces The Festool Protector PR ETS-R 125 is a practical accessory for Festool random-orbit sanders, providing reliable protection for delicate edges, adjacent surfaces and workpieces during sanding work. Particularly when working on high-quality furniture, painted surfaces or delicate components, the Protector prevents unwanted sanding marks and damage to adjacent areas. Thanks to its precise fit, the Festool edge guard can be fitted quickly and enables controlled work directly on edges and transitions. The result is a clean sanded finish and professionally prepared surfaces – ideal for joiners, cabinetmakers, painters and discerning DIY enthusiasts. Benefits Original Festool Protector PR ETS-R 125 Protects edges and adjacent surfaces during sanding Prevents unwanted sanding marks and damage Quick installation without time-consuming adjustments The perfect complement for precise surface work Ideal for furniture making, interior fitting and paint preparation Greater safety when working on delicate workpieces Contents of pack 1 piece
Festool Rustilon brush KB 85 (grit K80, Ø 150 mm, for BMS 180, item number 411969)
Festool Rustilon Brush KB 85 – K80 plastic sanding brush for perfect smoothing and intermediate sanding The Festool Rustilon Brush KB 85 (item number 411969) is the ideal tool for the second stage of surface texturing and woodworking. Fitted with high-quality plastic bristles embedded with fine K80-grade abrasive grit, this brush is perfect for intermediate sanding, smoothing and cleaning of wood surfaces that have already been textured. It gently removes raised wood fibres after the first brushing pass without flattening the wood’s texture, and optimally prepares the wood for subsequent staining, oiling or varnishing. Specially developed for the Festool Rustilon BMS 180 brushing machine, the KB 85 impresses with its durability, precision and a uniform sanding finish. Proven applications for perfect results: Intermediate sanding of wood: Reliable smoothing of raised wood fibres after the first texturing pass. Cleaning & deburring: Removal of fine residues, milling marks and loose wood dust from textured surfaces. Furniture making & interior fit-out: Perfect preparation of solid timber, ceiling beams and timber profiles for stains, oils and varnishes. System-integrated use: Specifically designed to fit the spindle mount of the Festool Rustilon BMS 180 brushing machine. Your benefits when working Embedded K80 abrasive grain: Plastic bristles with integrated abrasive for a uniform, fine sanding effect. Gentle deburring: Efficiently removes wood fibres without damaging the wood’s natural grain. Robust injection-moulded body: High dimensional stability and long service life, even with intensive workshop use. Optimal preparation: Creates the perfect base for the final surface finish and staining. Technical data & features Feature Specification Manufacturer / Brand Festool Model name Rustilon brush KB 85 (plastic sanding brush) Festool item number 411969 Outer diameter 150.00 mm Brush width 85.00 mm Bore diameter 16–30 mm Bristle material Plastic bristles with embedded K80 abrasive grain Base body Injection-moulded plastic Compatible machines Festool Rustilon BMS 180 brushing machine Instructions for use Ideally, use the Rustilon KB 85 brush as the second step following rough texturing with a wire-bristle brush (e.g. Festool LD 85). Always guide the BMS 180 brushing machine over the workpiece with even, light pressure, following the grain of the wood. This will break off any protruding wood fibres and produce a clean, smooth finish without any chipped edges.
Festool brush segment BS-LHS-E 225 - 203189
Replacement brush segment for the PLANEX easy The Festool brush segment BS-LHS-E 225 is the correct replacement part for the PLANEX easy LHS-E 225 EQ long-neck sander. It replaces a worn brush segment on the sanding head, thereby ensuring that dust extraction remains reliable during sanding. The brushes keep the sanding dust generated as close as possible to the sanding head, thereby improving the performance of the dust extraction system. When worn, the segment can be easily replaced. The brush segment can also be removed for working directly on edges and adjacent surfaces. Advantages Suitable spare part for the PLANEX easy LHS-E 225 EQ Supports effective collection of sanding dust Removable for sanding close to edges Practical replacement when brushes are worn Maintains the function of the brush insert on the sanding head Ideal for drywall installation, renovation and painting work Contents 1 piece
Festool WA angle fence - 574797
Longitudinal cut, cross cut, angle cut - to perfection. Strengths and benefits Quick and easy attachment in the V-groove of the machine The detent for the angle points can be switched off if required Simple adjustment and locking The angle stop can be used with the stop rider for repeatable cuts Main areas of application Ideally suited for longitudinal, cross and angle cuts. Quick and easy attachment in the V-groove on the machine The detent for the angle points can be switched off if required Suitable for for CS 70, CS 50, CMS-GE for working with 2 stops Stop for angular, cross-cut and rip cuts
Festool Protector PR DTS-R 100x150 - 201692
Perfect protection when sanding delicate workpieces The Festool Protector PR DTS-R 100x150 has been specially developed for use with compatible Festool delta sanders and reliably protects edges and adjacent surfaces from accidental damage. Particularly when sanding painted surfaces, furniture or delicate components, the Protector enables you to work safely right up to the edge of the workpiece. Thanks to its precise fit, the edge guard can be fitted quickly and without tools. This prevents the sanding pad or sanding shoe from coming into contact with adjacent surfaces. The result is a clean sanding finish, less rework and a professional-quality finish – both in the workshop and on the building site. Advantages Original Festool Protector PR DTS-R 100x150 Reliably protects edges and adjacent surfaces Precise sanding right up to the edge of the workpiece Reduces scratches and unwanted material removal Quick, tool-free assembly Robust design for daily use Ideal for professional woodand paintwork Contents of pack 1 piece
FINIXA Interface Pad soft 15 holes Ø 150mm 5-10 mm SAM 36M-37M
DetailsFlexible sanding pad that makes it possible to machine complex shapes and curves with the random orbital sander. The interface pad can also be used to finely sand a surface without changing its shape and evenness.5mm or 10mm.perforated 15 times.Contents3 pieces in the PU
Contents: 3 piece (€10.65 / 1 piece)
FINIXA hand sanding block with suction incl. 3 different moulding attachments. SAB 07
DetailsSanding block set including 3 different mould attachmentsFor use with 150 mm sanding discs, e.g. SPDA and SFDC (Sharp White)Multihole dust extractionErgonomically shaped handleSuitable for flat, concave and convex surfacesReduction of material losses through the ecological recycling of 150 mm sanding discs that are still usable.Diameter 150mm for SPDA red and SFDC white
FINIXA hand sanding block with suction incl. 4 different moulding attachments SAB 35
DetailsSanding block set including 4 different moulded attachmentsShape-optimised attachments for faster abrasive changesMultihole dust extractionErgonomically shaped handleSuitable for flat, concave as well as slightly and strongly convex surfacesBalanced weight distribution for even contact pressureSize: 70mm x 198mm
FINIXA sanding block with suction unit SAB 30
Details Ergonomic handle. Balanced weight distribution for even pressure. With suction nozzle. Rounding for better abrasive change. Size 70 x 125mm, 8 holes