Oils
Give wooden surfaces a special radiance - with our high-quality wood oils. They provide the material with lasting protection against wear, moisture and soiling, while retaining its natural texture and colour.
Our range includes:
-
Nourishing wood oils for furniture, floors and stairs indoors
-
Weather-resistant outdoor oils to protect patios, garden furniture and façades
-
Colour oils for creative design and individual accents
-
Specialised products for different types of wood such as oak, beech or exotic woods
Whether classic hard oil, quick-drying disposable oil or particularly ecological variants - here you will find the right product for every requirement.
➔ We also offer matching waxes for finishing, care products for refreshing and application aids & accessories.
Hesse Lignal WETPROTECT-OIL OE 52068
WETPROTECT-OIL OE 52068 – Der optimale Schutz für Holzoberflächen Das WETPROTECT-OIL OE 52068 von Hesse Lignal ist eine hochwertige Mischung aus Naturölen und modifizierten Alkydharzen, die speziell entwickelt wurde, um Holzoberflächen optimal zu schützen. Mit seinem hervorragenden Penetrationsvermögen imprägniert dieses dünnflüssige Öl die Holzfasern tief und schützt den Untergrund wirksam vor Feuchtigkeitseinwirkungen. ProdukteigenschaftenHervorragende Feuchtigkeitsbeständigkeit: Ideal für den Einsatz in Feuchträumen wie Küche und Bad, wo ein zuverlässiger Schutz unerlässlich ist.Erste Imprägnierschicht: Kann in Kombination mit anderen hochwertigen Ölen verwendet werden, um die Schutzwirkung zu maximieren.Umweltfreundlich: Enthält keine Fungizide oder Herbizide und ist gemäß CLP-Verordnung nicht eingestuft. Verarbeitet mit kobalt- und bleifreien Trockenstoffen sowie geruchsmilden Lösungsmitteln. AnwendungsmöglichkeitenDas WETPROTECT-OIL eignet sich hervorragend für die Oberflächenbehandlung von: Parkett- und Möbelbeschichtungen Wand- und Deckenvertäfelungen Treppen und Handläufen Kindermöbel und -spielzeug Verarbeitungshinweise Auftrag: Das Öl sollte satt auf die fachgerecht vorbereitete Fläche aufgetragen werden. Nach einer Einwirkzeit von 5-10 Minuten wird der Überschuss mit einem feinen Pad oder Baumwolltuch abgenommen.Trocknung: Bei 20 °C beträgt die Trocknungszeit ca. 6 Stunden, die vollständige Durchhärtung erfolgt nach 7 Tagen. Nachhaltigkeit: Mit einem Anteil von 59 % nachwachsenden Rohstoffen trägt das WETPROTECT-OIL aktiv zur Nachhaltigkeit bei und ist damit eine verantwortungsvolle Wahl für umweltbewusste Verbraucher. Inhalt1 Liter Nutzen Sie die Vorteile des WETPROTECT-OIL OE 52068 für langlebige und ästhetische Holzoberflächen!
Hesse Lignal COLOR-SOLID-OIL matt GBP 11252-colour tone
Hesse COLOR-SOLID-OIL - High-quality, coloured natural oil for exclusive wood surfacesHesse COLOR-SOLID-OIL is a high-performance, coloured natural oil with an extremely low solvent content and mild odour. Thanks to its outstanding mechanical and chemical resistance, it is ideal for the coloured finishing of interior wood surfaces - from normal to heavily used surfaces - with just a single oil application.The high-solids oil impresses with its easy application, fast drying and environmentally friendly formulation without cobalt and lead-containing siccatives. The oil can also be hardened as an option to further shorten the drying time and optimise the resistance of the surface even more.Perfect for anyone who wants to professionally protect wooden surfaces and enhance their appearance at the same time.Contents1 litre
Zweihorn Naturtrend Wood Design Oil NHDO
DescriptionNaturtrend Wood Design Oil NHDO is a naturally tinted, deeply penetrating and open-pored wood finish for indoor and outdoor use.The weatherproof, resistant oils and microfine colour pigments effectively block UV radiation.Depending on the type of wood, the surface is finished with natural white or stone grey or characteristically stained with mahogany, teak and walnut.Area of applicationSuitable for coloured wood design in interior areas (e.g. furniture and wood panelling) as well as non-dimensionally stable components in exterior areas such as floors, garden furniture, garden sheds, fences and balcony railings.Colour shades- White- Teak- Mahogany- Walnut- Basalt black- Grey
Pallmann Magic Oil 2K Colourless (components A+B)
Magic Oil 2 K from Pallmann is a solvent-free oil-wax combination. It consists of natural oils and waxes and is oxidative drying and cross-linking due to the addition of the hardener component.Areas of application: The Magic Oil is suitable for surface finishing of sanded wooden floors, parquet floors (including planks), sanded wood paving, ground multi-layer parquet elements and parquet on underfloor heating.The Magic Oil is easy to use as it can be easily applied with a roller or trowel. It enhances the natural structure of the wood and gives it a beautiful colour and protection against household chemicals. It meets the standards GISCODE Ö10 (oils/waxes, solvent-free), slip resistance R10 / DIN 55130, DIN 53160 (resistance to saliva and perspiration), EN 71-3 (safety of toys Part 3: Migration of certain product benefits / properties: elements).Package contents1 litre (Magic Oil + hardener)2.75 litres (Magic Oil + hardener)
Rubio Monocoat Hybrid Wood Protector
PropertiesRubio MONOCOAT Hybrid Wood Protector is a wood preservative for new and weathered wood. It protects the wood against weathering and discolouration. Colour refreshment and wood protection is possible with just one product, which is very easy to use and does not require sanding. Application areas/suitabilityRubio MONOCOAT Hybrid Wood Protector can be used universally on all types of wood, both indoors and outdoors. Externally, this includes new or weathered wood on façades, terraces, garden furniture, carports etc.. ResultThe single application achieves a particularly even result. There is no film formation and no flaking. Colour shadeThe desired colour can be selected from classic shades as well as from the vibrant pop colours. IngredientsEnvironmentally friendly: The colour oil is completely VOC- and solvent-free and therefore protects the environment as well as your health!Application Application is carried out in three simple steps: 1.) Preparation- Soak the wood and clean with RMC Exterior Cleaner.2.) Apply oil- Apply a thin layer of RMC Hybrid Wood Protector with a flat brush.- Leave to act for 10 minutes- Smooth the surface without product3.) Remove excess- Rub off excess product after 5 minutes Post-treatmentTreated wood can be used after 48 hours. RMC Exterior Soap is recommended for maintenance and RMC Hybrid Wood Protector for renewal. RequirementsAs only one coat of oil needs to be applied, handling the oil is particularly easy and user-friendly. The special molecular bonding technology prevents streaks and film formation, as well as overlapping and build-up, thus ensuring optimum results with minimal effort. This makes the product suitable for every DIY enthusiast!The product can be applied using a polishing machine, manually or industrially. ConsumptionAs only one coat of RMC Hybrid Wood Protector is required, consumption is extremely low. One litre can treat 30m² outdoors and 50m² indoors.Tools & accessoriesThe oil can be applied with a flat brush or decking brush and removed with a simple cotton cloth. Tools are cleaned with RMC Cleaner. Available in the following sizes100 ml500 ml1 litre2.5 litres Available in the following coloursWhite, Pure, Natural, Teak, Royal, Chocolate, Larch, Wet Teak, Grey, Black, Look Ipe, Light Grey, Taupe, Charcoal, Wet Oak
OSMO Hardwax-Oil Original 3032 Colourless Matt
Product descriptionColourless wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch. Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish. Simple application - without primer and intermediate sanding - saves time and money. Wood-friendly, open-pored, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains. The dried coat is harmless to humans, animals and plants (resistant to saliva and perspiration according to DIN 53160, suitable for children's toys according to EN 71.3).Areas of applicationOsmo Hardwax-Oil Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship floors, OSB and cork floors as well as for furniture surfaces.IngredientsBased on natural vegetable oils (sunflower oil, soya oil, safflower oil) and waxes, paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains max. 500 g/l VOC. We will be happy to send you a detailed full declaration on request.Physical propertiesSpecific weight: 0.88-0.95 g/cm³ Viscosity: 95-240 mPas Odour: faint/mild, odourless after drying Flash point: ≥ 60 °C according to DIN EN ISO 2719 pH value: not required Shelf life: 5 years and longer if kept in original sealed container. If thickened by frost, store at room temperature for 24 hours before use.PreparationThe wood surface must be clean, dry and frost-free (max. 18 % wood moisture). Osmo HartwachsÖl Original is ready to spread, do not dilute. Stir thoroughly. Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste). Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling. The coating result depends, among other things, on the condition of the wood. Therefore, a test coat should always be applied - especially on unknown substrates.ApplicationApply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil-Paint Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly. Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly. When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.Cleaning the toolsWith Osmo Brush Cleaner (aromatic-free). Drying time: Allow to dry for approx. 8-10 hours in a standard climate (23 °C/50% relative humidity) with good ventilation. At lower temperatures and/or higher humidity, the drying time is significantly longer.CoverageThe coverage of the product is 24 m²/1 litre with 1 coat. It depends largely on the condition of the existing wood surface. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage. Initial maintenance of industrially pre-oiled or finally oiled wooden floors: In the case of industrially pre-oiled wooden floors, it must always be clarified before initial maintenance whether the floor is pre-oiled or finally oiled. In the case of a pre-oiled floor, no initial maintenance is usually required, but a further thin application of oil. With a finished oiled floor, on the other hand, a sufficiently protective surface is applied from the factory. If you want to build up additional protection here, especially for intensively used areas, this is referred to as initial maintenance directly after the floor has been laid. For warranty reasons, we recommend following the care instructions and regulations of the manufacturer of your wooden floor. Alternatively, if you have decided to protect your wooden floor with a final coat of Osmo HartwachsÖl, please note the following points. Apply a test coat to a sample or remnant of the floor to be treated in accordance with the following application instructions: Final coat of a pre-oiled wooden floor: With pre-oiled wooden floors, the wood pore is usually still receptive for a thin application of Osmo Hartwachs-Öl with a floor brush or microfibre roller in the direction of the wood grain. This must be spread out thoroughly. Calculate with a consumption of approx. 20-25 g/m². Initial care of a finished oiled wooden floor: Finished oiled wooden floors do not usually require any additional surface protection under normal expected loads. Nevertheless, it may be advisable to carry out initial maintenance to extend the regular maintenance intervals in areas with a high level of expected wear. As the wood pores of industrially finished oiled wooden floors are generally hardly receptive to an additional coat of Osmo Hartwachs-Öl, care must be taken here to apply a very thin coat. Applied Hardwax-Oil must be levelled with a single-disc polishing machine or the Osmo pad holder with joint - in each case in conjunction with a white pad. Any excess must be removed with a lint-free cotton cloth. Calculate with a consumption of approx. 5-6 g/m². After the additional care application has dried, it must not be possible to simply scrape the hard wax oil off the surface with a fingernail or other blunt object.NotesOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation will delay drying. We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba, etc.). Test coat recommended. Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours). Caution: Apply a maximum of one thin coat with a cloth inside cupboards and drawers. For floors that have already been treated in the factory, please always read the product information before applying Osmo Hartwachs-Öl Original. Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop. For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required. If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.Safety instructionsKeep out of the reach of children. Do not get in eyes, on skin or clothing. If medical advice is required, have packaging or labelling ready. Use only outdoors or in a well-ventilated area. Caution: Wash out cloths soaked with the liquid product immediately after use or store in an airtight metal container (risk of spontaneous combustion). The dried paint fulfils class B2 (normal flammability) according to DIN 4102.DisposalDispose of product residues and packaging in accordance with local regulations (EU waste code no. 08 01 12). Only dispose of empty cans for recycling.The above information is provided to the best of our knowledge and belief, but without guarantee.Contents 750 ml 2.5 litres 10 litres
Asuso Nature Line Bangkirai oil
Nature Line (NL) Bangkira oil can be used to treat outdoor hardwood garden furniture. Can also be used on fungicide-protected surfaces.Areas of application: Garden furniture, pergolas, hardwood decking on which water can run off. Pre-treatment with ASUSO Wood Protection Primer or Aqua Wood Impregnation is required for wood at risk of blue stain.The treatment gives the wood a hard-wearing surface and colour tone that emphasises the wood structure. The oil is low in active ingredients and odour.Further information can be found in the safety data sheet and the technical data sheet.
Asuso Nature Line Teak Oil
Areas of application: Garden furniture, pergolas, hardwood decking where water can run off. Can also be used on fungicide-protected surfaces. The treatment gives the wood a hard-wearing surface and colour tone that emphasises the wood structure. The oil is low in active ingredients and odour. Pre-treatment with ASUSO Wood Protection Primer or Aqua Wood Impregnation is required for wood at risk of blue stain.Further information can be found in the safety data sheet and the technical data sheet.
Asuso Nature Line Hard Oil
Natue Line (NL) hard oil protects and refines wood, stone and cork to protect surfaces from wear and tear. Thanks to its liquid consistency, the oil penetrates the surfaces extremely well. It is water-repellent and can be used well in living spaces. The treated surface is highly hard-wearing.Areas of applicationHousing construction, care sector, nurseries, schools, day care centres, offices, work surfaces, etc.. With tests in accordance with DIN 53160 (saliva and perspiration resistant) and DIN EN 71, Part 3 (toys), it is ideally suited for use on parquet, floorboards, untreated softwood and hardwood for indoor use. It is water-repellent and can be used well in living areas.Further information can be found in the safety data sheet and the technical data sheet.
Rubio Monocoat Oil Plus 2C (A component)
Oil of the latest generation Rubio Monocoat Oil Plus 2C is a next generation product that colours and protects your wood with a single coat. The combination of oil (A) and accelerator (B) ensures high-quality protection that dries and hardens quickly. Consumptionapprox. 30 to 50 m²/litre
Asuso 2K oil
Suitable for heavily used wood and parquet surfaces, as the oil offers optimum water stain resistance and slip resistance. It is particularly suitable for initial treatment.The oil can also be used to treat hard-wearing surfaces. This makes it ideal for use in kitchens and bathrooms.The oil has an impregnating effect, creating a naturally matt surface that is non-slip and dirt-repellent.Includes hardenerThe hardener is included in the container size.
OSMO Hard Wax Oil Original 3032 Colourless Satin Matt
Product descriptionColourless wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Hartwachs-Öl Original is dirt-resistant, water-repellent, abrasion-resistant and produces a surface that is pleasant to the touch. Compared to conventional coating systems, the use of plant-based ingredients results in a more even colour and a more harmonious finish. Simple application - without primer and intermediate sanding - saves time and money. Open-pored, suitable for wood, does not crack, does not flake or peel. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with DIN 68861-1A - no water stains. The dried coat is harmless to humans, animals and plants (resistant to saliva and perspiration according to DIN 53160, suitable for children's toys according to EN 71.3).Areas of applicationOsmo Hardwax-Oil Original is ideal for the protection of all wooden floors such as solid wood floorboards, country house floorboards, ship floors, OSB and cork floors as well as for furniture surfaces.IngredientsBased on natural vegetable oils (sunflower oil, soya oil, safflower oil) and waxes, paraffins, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (petrol-free). EU limit value for the product (Cat. 1.i): 500 g/l VOC (2010). This product contains max. 500 g/l VOC. We will be happy to send you a detailed full declaration on request.Physical propertiesSpecific weight: 0.88-0.95 g/cm³ Viscosity: 95-240 mPas Odour: faint/mild, odourless after drying Flash point: ≥ 60 °C according to DIN EN ISO 2719 pH value: not required Shelf life: 5 years and longer if kept in original sealed container. If thickened by frost, store at room temperature for 24 hours before use.PreparationThe wood surface must be clean, dry and frost-free (max. 18 % wood moisture). Osmo HartwachsÖl Original is ready to spread, do not dilute. Stir thoroughly. Thoroughly clean old open-pored coats. Old coats of paint and varnish must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in the wood (Osmo wood paste). Sand the wood surface carefully, starting with coarse sandpaper - final sanding for floors P120-150, furniture P180-240. Remove sanding dust by sweeping and vacuuming the surface before oiling. The coating result depends, among other things, on the condition of the wood. Therefore, a test coat should always be applied - especially on unknown substrates.ApplicationApply thinly in the direction of the wood grain with Osmo Surface Brush, Floor Brush, Oil-Paint Applicator Fleece (Hand Pad Holder) or Microfibre Roller and spread thoroughly. Allow to dry for 8-10 hours with good ventilation. After drying, apply the second coat thinly and quickly. When renovating an already oiled surface, one coat on the dirt-cleaned surface is usually sufficient.Cleaning the toolsWith Osmo Brush Cleaner (aromatic-free). Drying time: Allow to dry for approx. 8-10 hours in a standard climate (23 °C/50% relative humidity) with good ventilation. At lower temperatures and/or higher humidity, the drying time is significantly longer.CoverageThe coverage of the product is 24 m²/1 litre with 1 coat. It depends largely on the condition of the existing wood surface. All information refers to smooth and planed/sanded surfaces. Other surfaces may result in different coverage. Initial maintenance of industrially pre-oiled or finally oiled wooden floors: In the case of industrially pre-oiled wooden floors, it must always be clarified before initial maintenance whether the floor is pre-oiled or finally oiled. In the case of a pre-oiled floor, no initial maintenance is usually required, but a further thin application of oil. With a finished oiled floor, on the other hand, a sufficiently protective surface is applied from the factory. If you want to build up additional protection here, especially for intensively used areas, this is referred to as initial maintenance directly after the floor has been laid. For warranty reasons, we recommend following the care instructions and regulations of the manufacturer of your wooden floor. Alternatively, if you have decided to protect your wooden floor with a final coat of Osmo HartwachsÖl, please note the following points. Apply a test coat to a sample or remnant of the floor to be treated in accordance with the following application instructions: Final coat of a pre-oiled wooden floor: With pre-oiled wooden floors, the wood pore is usually still receptive for a thin application of Osmo Hartwachs-Öl with a floor brush or microfibre roller in the direction of the wood grain. This must be spread out thoroughly. Calculate with a consumption of approx. 20-25 g/m². Initial care of a finished oiled wooden floor: Finished oiled wooden floors do not usually require any additional surface protection under normal expected loads. Nevertheless, it may be advisable to carry out initial maintenance to extend the regular maintenance intervals in areas with a high expected load. As the wood pores of industrially finished oiled wooden floors are generally hardly receptive to an additional coat of Osmo Hartwachs-Öl, care must be taken here to apply a very thin coat. Applied Hardwax-Oil must be levelled with a single-disc polishing machine or the Osmo pad holder with joint - in each case in conjunction with a white pad. Any excess must be removed with a lint-free cotton cloth. Calculate with a consumption of approx. 5-6 g/m². After the additional care application has dried, it must not be possible to simply scrape the hard wax oil off the surface with a fingernail or other blunt object.NotesOils intensify the natural colour of the wood (permanent wet effect). Too thick an application and insufficient ventilation will delay drying. We recommend the use of Osmo Klarwachs for dark and richly coloured hardwoods (e.g. wenge, merbau, jatoba, etc.). Test coat recommended. Due to the high absorbency of cork surfaces, a particularly thin coat should be applied. A longer drying time is to be expected on cork (at least 24 hours). Caution: Apply a maximum of one thin coat with a cloth inside cupboards and drawers. For floors that have already been treated in the factory, please always read the product information before applying Osmo Hartwachs-Öl Original. Wood surfaces treated with Osmo Hartwachs-Öl Original are easy to maintain. Remove coarse dirt with a broom or hoover. To clean, add Osmo Wisch-Fix to the wiping water and clean the surface with a damp (not wet!) mop. For refreshing and intensive cleaning, use Osmo Wax Care and Cleaning Agent as required. If a higher gloss level is desired, apply a thin layer of Osmo Wax Care and Cleaning Agent after thorough drying and polish after drying.Safety instructionsKeep out of the reach of children. Do not get in eyes, on skin or clothing. If medical advice is required, have packaging or labelling ready. Use only outdoors or in a well-ventilated area. Caution: Wash out cloths soaked with the liquid product immediately after use or store in an airtight metal container (risk of spontaneous combustion). The dried paint fulfils class B2 (normal flammability) according to DIN 4102.DisposalDispose of product residues and packaging in accordance with local regulations (EU waste code no. 08 01 12). Only dispose of empty cans for recycling.The above information is provided to the best of our knowledge and belief, but without guarantee.Contents750 ml2.5 litres10 litres
Rubio Monocoat Oil Plus 2C (A+B)
Rubio Monocoat Oil Plus 2C is a first-class solution for the surface treatment of wood. This unique oil has been specially developed to colour, protect and maintain wood in just one application. Thanks to its advanced molecular bonding technology, it forms a unique molecular bond with the wood fibres, ensuring an extremely durable and resistant surface. Rubio Monocoat Oil Plus 2C is easy to apply and only requires a single coat. This ecological formula is free of VOCs (volatile organic compounds) and harmful chemicals, making it environmentally friendly and safe. The variety of colour shades available allows you to customise the wood and enhance its natural character while protecting it from moisture, wear and UV rays. This innovative solution is ideal for indoor and outdoor use and can be applied to various types of wood such as oak, beech, pine and more. Whether you want to treat furniture, floors, tables or other wooden surfaces, Rubio Monocoat Oil Plus 2C offers an unrivalled combination of protection, aesthetics and sustainability for your wood project. Enjoy a long-lasting and natural wood finish with this premium product Details 40 standard colours Enhances the natural look of wood. 0% VOC, contains no water or solvents. Easy to maintain. No overlapping or build-up. Minimum consumption: 30 - 50 m²/L. Can be used on all types of wood. Very resistant Water and heat resistant, ideal for kitchens and bathrooms. Very fast curing: 80% in 2 days. Short "dry care time": after just 5 days, the surface can be cleaned with soap and water. Packaging: duo can 350 ml, 1.3 L and 3.5 L.
Zweihorn Natural Trend Hard Wax Oil NHWO
Naturtrend Hard Wax Oil NHWO is a surface protection product with a natural wood look, without scorching, based on high-quality oils and waxes with excellent filling power and high penetration behaviour.It offers a great look and combination with a very good feel; very easy to apply; offers high water-repellent and hard-wearing wood protection indoors.It is free from biocidal active ingredients and preservatives.The hard wax oil consists of aromatic-free hydrocarbons, sunflower oil, rapeseed oil, safflower oil, soya oil, shellac wax, candellila wax, carnauba wax, mircrowax and lead-free drying agents.Area of applicationSuitable for stressed interior wooden surfaces (wooden floors, cork, OSB boards, glued wood, worktops, furniture, screed, terracotta and unglazed tiles).Suitable for all interior rooms including damp rooms such as bathrooms and kitchens.Also ideal for nurseries, children's toys, children's rooms, hospitals and much more.Further information can be found in the safety data sheet and the technical data sheet.
Zweihorn Naturtrend Project Oil NPO
High-quality, transparent oil with wax content for almost all areas of application. good filling power no scorching very fast drying easy to apply open-pored=healthy indoor climate our recommendation for stairs and parquet Technical data sheet
Zweihorn Natural Trend Hard Oil NHO
Naturtrend Hard Oil NHO is a highly penetrating, open-pored natural product with high filling power.The surfaces treated with this product are highly water-repellent, free from toxins, solvents and allergenic terpenes.The hard oil contains linseed oil varnish, nut oil, sunflower oil, poppy seed oil. Safflower oil, rapeseed oil, wood oil and lead- and barium-free metal soaps.Area of applicationSuitable for all interior wooden surfaces subject to stress. These include, for example, wooden and cork floors, furniture, worktops, wooden ceilings in damp rooms, wooden paving, industrial parquet and stairs.Further information can be found in the safety data sheet and the technical data sheet.
Contents: 0.75 Liter (€30.56 / 1 Liter)
Festool DOMINO dowel Sipo D 8x50/100 MAU - 494872
Stable. More stable. DOMINO.Strengths and benefitsDOMINO made from Sipo wood, resistant to insect and mould infestation, making it ideal for outdoor useThe cross-section of a DOMINO dowel corresponds to that of three round dowels of the same drilling diameter, making it extremely stable in comparisonThe laterally protruding guide ribs centre the dowel in the DOMINO routing and thus ensure perfect alignment of the workpiecesSpecially shaped glue pockets and longitudinal grooves distribute the glue evenly for an optimum connectionExcess glue can escape through the lateral longitudinal grooves100% torsion-proof from the very first DOMINO dowelQuickly find the right dowel thanks to embossed size informationMain areas of applicationEspecially for outdoor use - Stable connections in solid wood and panel material - Furniture, trade fair and shop constructionSuitable forfor DF 500 and DF 700Material: SipoDowel made from mahoganyweather-resistantFSC-certified
Contents: 100 Stück (€0.37 / 1 Stück)
ADLER Legno oil
ADLER Legno-öl is a universal oil that is ideal for furniture and interior finishing, both for DIY projects and for commercial use. It is a quick-drying oil that is easy to use and suitable for both hardwoods and softwoods. Legno oil is characterised by its very good penetration capacity, excellent grain accentuation of the wood, good water resistance and pleasant feel. It is antistatic and hardens by absorbing atmospheric oxygen (oxidative drying). Legno oil can be used for surfaces subject to normal wear in furniture and interior design, such as bedroom and living room furnishings and wooden floors. It is available in the colours Colourless 50880 and White 50881. Please note that when treating interior surfaces of furniture and cupboards, a maximum of one thin coat of this product should be applied due to possible odour nuisance. Details Universal oil for furniture and interior finishing Quick drying and easy to apply Suitable for hardwoods and softwoods Good penetration and accentuation of the wood Good water resistance and pleasant feel Antistatic Hardens through oxidative drying Ideal for surfaces subject to normal wear in furniture and interior design Available in the colour shades colourless 50880 and white 50881 Further information can be found in the technical data sheet and safety data sheet.
ADLER Pullex floor oil
Solvent-based, pigmented oil for horizontal exterior wooden surfaces for DIY and commercial use. Water-repellent, highly penetrating oil for horizontal wooden surfaces outdoors (open-pored). Protects hardwoods and softwoods from dirt and moisture. Allows the wood to breathe and reduces swelling and shrinkage. Micronised special pigments guarantee very good weather and UV resistance as well as excellent colour stabilisation of exotic woods. Easy to apply without leaving a residue. Without the addition of aromatic solvents. Advantages Decking oil for horizontal outdoor surfaces Very good colour stabilisation for exotic woods Coating protects against blue stain and mould infestation Use colourless only for brightening Special properties UV-resistant Suitable for non-dimensionally stable wooden components Prepared ready for use Very high weather resistance Container sizes 750 ml, 2.5 litres
ADLER Pullex teak oil
Solvent-based oil for garden furniture for DIY and commercial use Ready-to-use oil for the treatment of hardwoods and exotic woods. Advantages Protects and cares for all hardwoods and exotic woods such as larch or teak Increased weather protection thanks to "Teak" colour tone Also suitable for indoor furniture, e.g. bathroom furniture Excellent grain accentuation and water-repellent, biocide-free Easy to apply with a cloth Special properties UV-resistant Suitable for non-dimensionally stable wooden components Waterproof Antistatic Good weather resistance Container size 1 litre
ADLER Pullex wood oil
Solvent-based oil for vertical exterior wood surfaces for DIY and commercial use Binder-rich wood oil for DIY and commercial use for exterior wood based on modified oils with very good penetration properties and special, highly effective UV absorbers. Advantages Wood oil based on natural, refined oils For exterior vertical surfaces such as facades or balconies Good weather resistance thanks to special UV filters, especially for natural and larch colours Coating protects against blue stain and mould infestation Wide range of colours thanks to the C4Y colour mixing system Special properties UV-resistant Suitable for non-dimensionally stable timber components Good weather resistance Container sizes 750 ml, 2.5 litres, 10 litres
Hesse Lignal PROTECT-OIL OE 5284x (gloss level)
Product descriptionOil based on linseed oil and alkyd resin modified with natural oil with the addition of lead- and cobalt-freedrying agents, viscoplastic, abrasion-resistant, diluted with isoparaffin; with good grain accentuation of the wood. Thanks tothe optimised combination of raw materials, this product has an excellent lightfastness for oil systemsand only a minimal tendency to dark yellowing! The open-pored and breathable surface ishard-wearing. Due to its innovative raw material composition, this product is not classified according to thecurrently valid GHS/CLP regulation! For the care and repair of oiled floors.Areas of applicationFor parquet and furniture coatings as well as the surface treatment of interior wood, such asliving rooms and bedrooms, children's furniture, wall and ceiling panelling. The chemical and mechanicalresistance depends on the number of layers of oil applied.
Hesse Lignal OIL-HARDENER OR 5180
This is a hardener for Hesse Lignal oils with the designations OE and OB.Oil Hardener is an additive for oils from Hesse Lignal. By adding it, the cross-linking and hardening of the oil is brought about.Please refer to the technical data sheet of the oil to be processed and the safety data sheets for the exact quantity ratios and processing instructions.Contents0.25 litres
Contents: 0.25 Liter (€65.76 / 1 Liter)
Hesse Lignal NATURAL-COLOR-OIL OB 52832-colour tone
Oil based on linseed oil and alkyd resin modified with natural oil with the addition of lead- and cobalt-free drying agents, viscoplastic, abrasion-resistant, diluted with isoparaffin.For open-pored, vapour-permeable surfaces.Emission-tested building product according to DIBT principles.The Natural-Color-Oil is available in various colour shades.Areas of applicationFor parquet and furniture coatingsSurface treatment of interior wood, such as living room, bedroom and children's furniture, wall and ceiling panelling.
Hesse Lignal PROTECT-OIL OE 52842
Oil based on linseed oil and alkyd resin modified with natural oil with the addition of lead- and cobalt-freedrying agents, viscoplastic, abrasion-resistant, diluted with isoparaffin; with good grain accentuation of the wood. Thanks tothe optimised combination of raw materials, this product has an excellent lightfastness for oil systemsand only a minimal tendency to dark yellowing! The open-pored and breathable surface ishard-wearing. Due to its innovative raw material composition, this product is not classified according to thecurrently valid GHS/CLP regulation! For the care and repair of oiled floors.Areas of applicationFor parquet and furniture coatings as well as the surface treatment of interior wood, such asliving rooms and bedrooms, children's furniture, wall and ceiling panelling. The chemical and mechanicalresistance depends on the number of coats of oil applied.Contents1 litre
Hesse Lignal PRIMER WHITE-OIL OB 52892-77
Hesse PRIMER WHITE-OIL OB 52892-77 is a parquet oil based on linseed, sunflower and jojoba oil, as well as alkyd resin modified with natural oil.It is free from cobalt and lead-containing siccatives, viscoplastic, pigmented, abrasion-resistant. Emission-tested building product in accordance with DIBT principles in conjunction with Hesse water-based lacquers.Areas of applicationIn living areas for parquet and wooden floors as a glazing primer under Hesse PURA-ONE or PURA-NATURA, primarily on oak.
Contents: 3 Liter (€35.72 / 1 Liter)
Hesse Lignal RESIN-OIL silk matt OE 52164
RESIN-OIL OE 52164 (silk matt) is an oil based on linseed oil and alkyd resin modified with natural oil with the addition of lead- and cobalt-free drying agents.It is silk matt, diluted with isoparaffin, viscoplastic, hard-wearing and highly abrasion-resistant.Areas of applicationFor all interior finishing work and furniture coating for parquet and wooden floors as well as OSB boards and cork floors, and also for stairs and handrails.The durability and abrasion resistance depends on the amount of material applied.
Hesse Lignal RESIN-OIL OE 52167 (semi-gloss)
Hesse Lignal RESIN-OIL OE 52167 (semi-gloss) is a high-quality oil made from linseed oil and alkyd resin modified with natural oil. It also contains lead- and cobalt-free drying agents and is diluted with isoparaffin. This oil is characterised by its viscoplastic texture, durability and high abrasion resistance . Areas of applicationIn all interior finishing and for furniture coating for parquet and wooden floors as well as OSB boards and cork floors, and also for stairs and handrails. The durability and abrasion resistance depends on the amount of material applied.Details High-quality oil based on linseed oil and natural oil-modified alkyd resinContains lead- and cobalt-free drying agentsDiluted with isoparaffin for optimum consistencyViscoplastic texture for easy applicationHardwearing and highly abrasion resistantIdeal for the treatment of interior and exterior wood surfacesGives the wood a silky gloss finish Note Further information can be found in the technical data sheet.
Hesse Lignal NATURAL-OIL OE 52832 colourless matt
PropertiesOil based on linseed oil and alkyd resin modified with natural oil with the addition of lead- and cobalt-free drying agents, viscoplastic, abrasion-resistant, diluted with isoparaffin.Suitable for open-pored, vapour-permeable surfaces. Emission-tested construction product in accordance with DIBT principles.Areas of applicationFor parquet and furniture coatings.Surface treatment of interior wood, such as living room, bedroom and children's furniture, wall and ceiling panelling.The durability and abrasion resistance depends on the amount of material applied.Note Further information can be found in the safety data sheet and the technical data sheet.
Hesse Lignal INVIPRO-OIL OE 52860
Hesse Lignal INVIPRO-OIL OE 52860 is a cobalt- and butanone oxime-free mixture of natural oils, natural waxes, combined with natural oil-refined alkyd resins. This quick-drying and aromatic-free oil contains light stabilisers and protects against colour changes for much longer than comparable oils. It penetrates the wood very well and thus maintains the open porosity and breathability of the wood surface. The surface remains antistatic and looks as if it had not been treated. However, it is abrasion-resistant and water-repellent, and therefore not only better protected, but also more durable than a raw wood surface. This also makes the surface easier to clean and real wood surfaces retain their individual and exclusive character for longer. Due to its innovative formulation, INVIPRO-OIL is decopaint compliant and not classified according to the currently valid GHS/CLP regulation.- Natural wood effect, the surface looks as if it has not been treatedFor even better resistance, we recommend Hesse Hardener OR 88Areas of applicationThroughout the home as a natural wood effect oil on surfaces with normal to medium wear; primarily on light-coloured woods.