Sanding discs
Whether you need coarse sanding or fine intermediate sanding, you can achieve first-class results on a wide range of materials with high-quality sanding discs. Our range offers you a large selection of diameters, grit sizes and backing materials for professional and precise sanding work.
What makes our sanding discs stand out:
-
Suitablefor wood, metal, paint and plastic
-
Wide range of grit sizes - from coarse to fine
-
Suitable for all standard sanding machines
-
Long service life and consistent sanding performance
3M Hookit Flexible Fine Sanding Discs 150mm | P600 – P2000
3M™ Hookit™ Flexible Fine Sanding Discs – Conforms perfectly to any shape The 3M™ Hookit™ Flexible Fine Sanding Discs are the secret weapon for challenging surfaces. Where conventional abrasives are rigid and tend to cut through edges too quickly, this disc truly shines. It combines the speed of a traditional abrasive with the flexibility of a soft finishing material. The result: an extremely consistent finish, even on complex components. Maximum safety on edges, recesses, and curves Modern vehicle designs are full of challenges: deep recesses, tight curves, and sharp edges. Thanks to its highly flexible backing material, the 3M™ Fine Sanding Disc moulds itself to every contour like a second skin. It distributes pressure optimally, effectively preventing you from sanding through the paint on raised areas. With grades ranging from P600 to P2000, you have the perfect disc for every stage – from scuffing to high-end polishing. Why this disc makes the difference Extremely Conforming Follows every curve and recess. Ideal for bumpers, mirror caps, and door sills. Perfect Finish Produces an extremely fine surface finish that is significantly quicker and easier to polish to a high shine afterwards. Clean Working The multi-hole perforation extracts dust directly. This keeps the disc sharp for longer and the workspace clean. Available variants: P600 | P800 | P1000 | P1200 | P1500 | P2000 Applications and Grit Guide Whether you’re sanding wet or dry – these discs are universally applicable: P600 - P800: Perfect for scuffing old paintwork and preparing surfaces for the base coat. P1000 - P1200: Ideal for blending transitions and gentle matting prior to clear coat application. P1500 - P2000: The professional solution for removing fine dust inclusions and preparing for high-gloss polishing. The benefits at a glance: No kinking: The material remains flexible but does not tear or crease. Hookit™ system: Secure hold on the backing pad and grit changes in seconds. Enormous time savings: Significantly reduces the need for manual hand-sanding on corners and edges. Versatile: Optimised for modern clear coat systems and plastic surfaces. Professional tip for use To maximise the disc’s service life, clean it regularly during use with compressed air or a damp cloth. When working on highly curved surfaces, using a soft interface pad is recommended to distribute pressure even more gently and achieve a flawless, cloud-free finish. Note: These discs are designed for 150mm random orbital sanders, but they are also excellent for hand-held use for detailed touch-ups.
Contents: 20 piece (€2.86 / 1 piece)
sia 5500 siastyle grinding discs – professional abrasives with grit sizes 60–800
Professional sanding discs for paint, filler and plastic SIA 5500 siastyle sanding discs have been developed for professional sanding work in the automotive and industrial sectors. They are ideal for use on paint, fillers, fillers, primers and plastic surfaces. The high-performance ceramic grain ensures consistently high material removal with controlled sanding behaviour. In combination with the robust film backing and Sinus Triangle technology, this results in a uniform sanding pattern with a long service life – even in demanding applications. The siafast hook and loop system also enables quick and secure abrasive changes and increases efficiency in the work process. Advantages at a glance High material removal thanks to high-performance ceramic grain Uniform sanding pattern throughout the entire service life Tear-resistant film backing for maximum process reliability Colour-coded grit sizes from 60 to 800 siafast hook-and-loop system for quick sanding disc changes Typical applications: Paint sanding, filler sanding, putty finishing, plastic sanding and surface preparation for painting. Technical data Grit range: 60–800 Abrasive grain: Ceramic / aluminium oxide Backing: Film Bonding: Full synthetic resin Coating: Stearate (from medium to fine grits) Fastening: siafast hook and loop system SIA 5500 siastyle sanding discs are available in diameters of Ø125 mm and Ø150 mm. All common grits and different hole patterns are combined in one product, offering maximum flexibility for professional applications.
Contents: 50 piece (€0.84 / 1 piece)
Mirka DEROS RS-System Ultimax Ligno - Sanding system kit for professional woodworking
Mirka DEROS RS-System Ultimax Ligno - Premium sanding kit for the highest demands The Mirka DEROS RS system Ultimax Ligno (KIT2413WOMDE) is the perfect combination of performance, precision and convenience for demanding wood and solid wood surfaces. This complete kit combines the powerful DEROS RS 600 sander with the high-quality Ultimax Ligno abrasives - for excellent surface quality with minimum effort. The DEROS RS is a rotary sander that can be used for sanding AND polishing. Unlike the well-known DEROS, it is not eccentrically driven. Advantages at a glance High performance & precision: Brushless 750 watt motor with adjustable speed from 700 - 2,500 rpm for maximum control. Efficient dust extraction: Integrated dust extraction function with multifit perforation ensures clean work surfaces and long abrasive life. Ultimax Ligno abrasives: Special grit structure for even removal, less edge damage and optimum service life. Ergonomic & lightweight: Weighs only approx. 1.8 kg, LED speed display, smooth start-up and Bluetooth connectivity with myMirka app. Universally applicable: Ideal for hardwood, solid wood, furniture, doors, window frames and stairs. Application The surface should be dry, clean and free of grease. The device can be operated with Ø 150 mm sanding discs and suitable extraction. For best results, a speed between 1,000 and 2,000 rpm is recommended. Change abrasives regularly to achieve consistently fine surfaces. Technical data Power=750 W brushless motor Speed range=700 - 2500 rpm Weight=approx. 1.8 kg Noise level=approx. 61 dB Sanding disc=Ø 150 mm With the Mirka DEROS RS system Ultimax Ligno, you get a sophisticated sanding system that combines speed, precision and comfort. Ideal for all wood professionals who want to achieve perfect results with minimum effort. Contents Mirka DEROS RS 600 150 mm Case/Systainer/Case 3 packs of Ultimax Ligno 150 mm Grip Multifit: 1 x K 40 (50 pcs. / pack), K 80 and K 120 (100 pcs. / pack) each
Festool Schleifmittel Granat D125 GR-Set - 578668
Anwendungsschwerpunkte Bearbeiten modernster Lacksysteme Besonders empfohlen für VOC-Lacke Bearbeiten härtester Untergründe Bearbeiten von Kunststoffen, Mineralwerkstoffen, Acryl, Spachtel, Füller Maler und Lackierer Schreiner Funktionen Die Granat Schleifscheiben sind speziell für VOC Lacke und harte Untergründe geeignet Dank der speziellen Beschichtung wird die Hütchenbildung vermieden und dadurch eine lange Standzeit generiert Andere Untergründe sind ebenfalls problemlos mit dem Granat Schleifmittel bearbeitbar Staubarmes Arbeiten schont die zu bearbeitende Oberfläche und die Gesundheit Effiziente Leistung ohne Kompromisse - die perfekte Ergänzung zur Schleifmaschine für Spachtel, Füller, Lacke (speziell VOC-Lacke und harte Untergründe) FSC™-zertifiziert Lieferumfang10x D125 P60 GR/10, 10x D125 P120 GR/10, 10x D125 P220 GR/10, 10x D125 P80 GR/10, 10x D125 P180 GR/10, 10x D125 P320 GR/10
3M Xtract Cubitron II Papierscheibe 732U, 150 mm, multihole
Details AUF DEN MASCHINENSCHLIFF AUSGELEGT: Die patentierte 3M Xtract Multihole-Lochung gewährleistet eine besonders gute Staubabsaugung, die ein Zusetzen verhindert, die Produktivität steigert und für eine sauberere Arbeitsumgebung sorgt FÜR UNTERSCHIEDLICHSTE ANWENDUNGSBEREICHE: Die vielseitige Scheibe eignet sich für ein breites Spektrum von Aufgaben, vom Materialabtrag bis hin zur Feinbearbeitung und zum Finishen verschiedener Oberflächen und Substrate. FUNKTIONIERT GUT AUF VIELEN OBERFLÄCHEN: Geeignet für Metalle, Lacke, Verbundwerkstoffe, Gelbeschichtungen und verschiedene Holzarten REVOLUTIONÄRES KORNDESIGN: Die 3M Präzisionskorntechnologie hält bis zu viermal so lang wie herkömmliche Schleifmittel IN EINER VIELZAHL VON KÖRNUNGEN ERHÄLTLICH: Wählen Sie aus Körnungen zwischen 80+ und 1000+ diejenige aus, die sich für Ihre spezielle Anwendung eignet FLEXIBLES TRÄGERMATERIAL: Die starke C-Papierunterlage bietet Flexibilität und eignet sich für Schleifanwendungen, bei denen die Kantenstabilität nicht im Vordergrund steht SCHNELLE UND EINFACHE SCHEIBENWECHSEL: Das 3M Hookit Befestigungssystem ermöglicht einfache Scheibenwechsel und trägt dazu bei, die Standzeit zu optimieren IN VERSCHIEDENEN KÖRNUNGEN ERHÄLTLICH: Wählen Sie aus Körnungen zwischen 80+ und 220+, diejenige aus, die sich für Ihre spezielle Anwendung eignet Die 3M Xtract Cubitron II Papierscheibe 732U verfügt über eine patentierte Multihole-Lochung von 3M, die eine bessere Staubabsaugung beim Finishen bietet. Teil der 3M Xtract Serie, dem Optimum in Sachen Staubentfernung und Leistung. Ihre innovative Multihole-Lochung sorgt für eine bessere Staubabsaugung als Produkte mit fünf oder sechs Löchern – dadurch wird der Abtrag verbessert und die Standzeit erheblich erhöht. Bei dieser Konstruktion ist es nicht nötig, sie auf die Löcher des Schleiftellers auszurichten, wodurch Scheibenwechsel schnell, einfach und bequem durchführbar sind. Die Scheibe verfügt über ein präzisionsgeformtes Keramikkorn von 3M, eine revolutionäre Weiterentwicklung der Schleifmitteltechnologie. Das dreieckig geformte Keramikmineral ist darauf ausgelegt, durch das Substrat zu schneiden, anstatt es auszufugen oder zu „pflügen“ wie herkömmliche Schleifmittel. Dadurch hält die Scheibe bis zu viermal so lang wie herkömmliche Schleifmittel. Diese Scheiben, die jetzt in den Körnungen 80+ bis 1.000+ erhältlich sind, wurden für eine Vielzahl von Substraten und Anwendungen entwickelt und bieten Flexibilität und Vielseitigkeit im Einsatz. Die Scheiben eignen sich für ein breites Spektrum von Aufgaben, vom Materialabtrag bis hin zur Feinbearbeitung und zum Finishen verschiedener Oberflächen und Substrate, darunter Metalle, Lacke, Verbundwerkstoffe, Gelbeschichtungen und verschiedene Holzarten. Die C-Papierunterlage bietet Flexibilität und eignet sich für Schleifanwendungen, bei denen die Kantenstabilität nicht im Vordergrund steht. Die besten Ergebnisse lassen sich zusammen mit 3M Xtract Exzenterschleifern erzielen. Wenn Staub die Schneidkante der Schleifmittel nicht zusetzen kann, bieten Schleifpapierscheiben einen stärkeren und schnelleren Abtrag. Die patentierte Multihole-Lochung bei unseren 3M Xtract Produkten entfernt Staub schneller als Produkte mit fünf oder sechs Löchern. Dieses Lochdesign muss nicht auf die Löcher des Schleiftellers ausgerichtet werden. Dadurch sind schnelle und einfache Scheibenwechsel möglich. Verwenden Sie diese Scheibe zusammen mit einem 3M Xtract Stützteller und einem Exzenterschleifer mit Absaugung (beide separat erhältlich), um eine optimale Staubabsaugung sicherzustellen. Inhalt50 Schleifscheiben
Contents: 50 piece (€0.89 / 1 piece)
3M Xtract Cubitron II Gewebeschleifscheibe 900DZ, 150mm, multihole
Details DECKT EINE BREITE PALETTE VON ANWENDUNGEN AB: Eine vielseitige Scheibe, die Arbeiten vom Exzenterschliff bis zum Entgraten bewältigt OPTIMIERT FÜR DEN EXZENTERSCHLIFF: Die patentierte 3M Xtract Multihole-Lochung gewährleistet eine besonders gute Staubabsaugung, die ein Zusetzen verhindert, die Produktivität steigert und für eine sauberere Arbeitsumgebung sorgt VIELSEITIGE EINSATZMÖGLICHKEITEN: Die Scheibe eignet sich gut für Aluminium, Glasfaser, Gelbeschichtungen sowie hartes und weiches Holz SCHNELLE UND EINFACHE SCHEIBENWECHSEL: Das 3M Hookit Befestigungssystem ermöglicht einfache Scheibenwechsel und trägt dazu bei, die Standzeit zu optimieren OFFENE STREUUNG: Die offene Streuung und spezielle Beschichtung verhindern ein Zusetzen und sorgen für optimale Abtragsraten über die gesamte Standzeit der Scheibe HOCHLEISTUNGS-KERAMIKSCHLEIFKORN: Das Keramik-Schleifmineral bietet auf einer Vielzahl von Oberflächen eine hervorragende Leistung LEICHTES GEWEBETRÄGERMATERIAL: Das J-Gewebeträgermaterial vereint Abnutzungsbeständigkeit und Flexibilität IN VERSCHIEDENEN KÖRNUNGEN ERHÄLTLICH: Wählen Sie aus Körnungen zwischen 60 und P220 diejenige aus, die sich für Ihre spezielle Anwendung eignet Die 3M Xtract Cubitron Gewebescheibe 900DZ verfügt über eine patentierte 3M Multihole-Lochung, die eine bessere Staubabsaugung beim Exzenterschliff bietet. Teil der 3M Xtract Serie, dem Optimum in Sachen Staubentfernung und Leistung. Die innovative Multihole-Lochung sorgt für eine bessere Staubabsaugung als Produkte mit fünf oder sechs Löchern – dadurch wird der Abtrag verbessert und die Standzeit erheblich erhöht. Bei dieser Konstruktion ist es nicht nötig, sie auf die Löcher des Schleiftellers auszurichten, wodurch Scheibenwechsel schnell, einfach und bequem durchführbar sind. Die Scheibe verfügt über das 3M präzisionsgeformte Keramikkorn, eine revolutionäre Weiterentwicklung der Schleifmitteltechnologie. Das dreieckig geformte Keramikmineral ist darauf ausgelegt, durch die Oberfläche zu schneiden, anstatt sie auszufugen oder zu „pflügen“ wie herkömmliche Schleifmittel. Dadurch verfügt die Scheibe über einen doppelt so schnellen Abtrag als handelsübliche Scheiben. Das J-Trägermaterial bietet eine hervorragende Reißfestigkeit und Langlebigkeit und ermöglicht ein gleichmäßiges und einheitliches Finish auf verschiedenen Oberflächen. Inhalt50 Schleifscheiben
Contents: 50 piece (€1.66 / 1 piece)
3M Cubitron II Fiberscheibe 982CX Pro KIT, 36+, 115 mm, 3 Scheiben + Stützteller
DetailsDas verbesserte präzisionsgeformte Korn von 3M erhöht noch einmal die legendäre Schnittgeschwindigkeit und Standzeit dieser Fiberscheiben, insbesondere bei Verwendung eines 3M Hochleistungs-Stütztellers mit Rippenstruktur.Beim Einsatz dieser Fiberscheiben mit extra harten Stütztellern wird weniger Druck benötigt als bei herkömmlichen Fiberscheiben, was die Arbeit des Benutzers erleichtert.Die 3M Fiberscheibe mit der längsten Standzeit steigert die Produktivität und minimiert die Anzahl der Scheibenwechsel bei manuellen und automatisierten AnwendungenDas dreieckige Keramikschleifkorn nutzt sich gleichmäßig ab, ermöglicht einen kühlen Schliff und bleibt über die gesamte Standzeit der Scheibe scharf. Zusammen mit den extra harten Stütztellern ist eine gleichbleibende und optimierte Leistung garantiert.Das Kit enthält drei Fiberscheiben 3M Cubitron II 982CX Pro und einen 3M Hochleistungs-Stützteller mit Rippenstruktur.Mit der 3M Cubitron II Fiberscheibe 982CX Pro in Kombination mit einem 3M Hochleistungs-Stützteller mit Rippenstruktur arbeiten Sie noch effektiver. Mit dem überarbeiteten 3M präzisionsgeformten Korn bringen diese Fiberscheiben die legendäre Schnittgeschwindigkeit und Standzeit der Cubitron II Schleifmittel auf ein neues Niveau. Die 3M Scheibenstützteller bieten den festen Halt, der für Schleifanwendungen erforderlich ist, Ausfallzeiten minimiert und zur Optimierung der Leistung beiträgt.Der Vorteil eines Komplettsystems 3M Cubitron II Fiberscheiben-Kit 982CX Pro ist Teil eines kompletten Schleifsystems für den Winkelschleifer. Mit den Scheiben des Typs 3M Cubitron II zusammen mit einem 3M Hochleistungs-Stützteller mit Rippenstruktur und einem leistungsstarken 3M Elektro-Winkelschleifer (separat erhältlich) sind Sie bereit für ein neues Produktivitätsniveau mit weniger Vibrationen, Lärm und Staub. Werden diese Komponenten gemeinsam eingesetzt, verstärken sie sich gegenseitig in Ihrer Wirksamkeit und bieten optimale Leistung des Schleifmittels – auch bezüglich Standzeit des Schleifmittels, Abtrag und Konsistenz. Überarbeitet für legendäre Leistung Wie wird das Beste besser? Bei der Entwicklung der 3M Cubitron II Fiberscheibe 982CX Pro haben 3M Ingenieure die bahnbrechende Technologie, die hinter den 3M Cubitron II Schleifmitteln steckt, neu formuliert.Dieses überarbeitete 3M präzisionsgeformte Korn bietet noch schnelleres Abtragen und noch längere Standzeit, damit Sie bei Ihren Arbeiten noch produktiver werden. Der 3M Hochleistungs-Stützteller mit Rippenstruktur ist über die gesamte Fläche gerippt, was den Anpressdruck beim Schleifen erhöht. Dieser zusätzliche Druck trägt dazu bei, das Brechen des präzisionsgeformten Korns von 3M in unseren 3M Cubitron II Fiberscheiben zu optimieren, was zu einer höheren Schnittgeschwindigkeit und Produktlebensdauer führt. Branchenübergreifend Zeichen setzen Wir haben das 3M Cubitron II Fiberscheiben-Kit 982CX Pro für Ihre Branche entwickelt. Bei der Metallbe- und -verarbeitung leistet die 982CX Pro großartige Arbeit bei Metallen, vom Baustahl bis hin zu Metallblechen.Mit einem breiten Anwendungsbereich im Schiff- und Bootsbau und in der Metallbe- und -verarbeitung werden die Ihrer Branche spezifischen Herausforderungen gemeistert. Im Maschinenbau sind diese Fiberscheiben bei harter Arbeit in Landwirtschaft und Bauwesen, bei Industriemaschinen, in der Lebensmittelverarbeitung oder für Öl- und Gasanlagen unschlagbar. Robotertechnik mit maximaler Effizienz Automatisierte Schleifprozesse sind nur so effizient wie die dafür verwendeten Schleifmittel. Führende Robotik-Systemintegratoren in aller Welt setzen auf 3M Cubitron II Fiberscheiben wegen ihrer legendären Leistungsfähigkeit und der Möglichkeiten zum Reduzieren von Ausfallzeiten. Das überarbeitete geformte Keramikkorn der 3M Cubitron II Fiberscheibe 982CX Pro lässt Roboter Schweißnähte bearbeiten und Effizienz maximieren, lange nachdem andere Fiberscheiben schon ausgewechselt werden mussten.Anwendungen im FokusEntfernen von Schweißnähten, Anfasen, Schleifen, Schweres Entgraten, Robotertechnik und andere automatisierte AnwendungenInhalt3 Schleifscheiben + 1 Schleifteller
3M™ Cubitron™ II Roloc™ fibre disc 786C, 50 mm, 80+, 33380
DetailsHigh cutting rateIncrease the productivity and efficiency of your workshopLong-lasting performanceRoloc™ system for quick changeoverThe 3M™ Cubitron™ II Roloc™ fibre disc is a high-quality fibre disc for the removal of spot welds and other grinding tasks.With the 3M™ Cubitron™ II Roloc™ fibre disc, quick disc changes are possible thanks to the Roloc quick-change system. Our sanding discs can be easily attached with the Roloc™ system, allowing for quick abrasive changes during sanding. The discs contain the high-quality Cubitron™ II mineral, which ensures high sanding rates. Increase the productivity and efficiency of your workshop with our 3M™ Cubitron™ II Roloc™ fibre discs. Available in three coarse grit sizes.Contents15 discs
Contents: 15 piece (€2.42 / 1 piece)
3M™ Cubitron™ II fibre disc 982CX Pro, 125 mm x 22 mm, 36+, 83322
DetailsThe redesigned 3M precision-moulded grain takes legendary speed and tool life to a new level.3M longest life fibre discs help increase productivity and reduce disc changes in manual and automated applicationsTriangular ceramic abrasive grain wears evenly, provides cool grinding and stays sharp for the life of the discCuts with less pressure than conventional fibre discs, reducing work effortRecommended for carbon steelContamination-free INOX standard for stainless steelGet more done with the 3M™ Cubitron™ II fibre disc 982CX Pro. With the revised 3M™ precision-formed grit, these fibre discs take the legendary cutting speed and service life of Cubitron™ II abrasives to a new level. Available in 36+ grit for medium and high pressure applications such as weld grinding, chamfering and deburring with heavy stock removal.Revised for legendary performance. How does the best get better? When developing the 3M™ Cubitron™ II Fibre Disc 982CX Pro, 3M engineers reformulated the breakthrough technology behind 3M™ Cubitron™ II abrasives. This revised 3M precision-formed grit offers even faster stock removal and even longer life to make you even more productive in your work.The advantage of a complete system The 3M™ Cubitron™ II fibre disc 982CX Pro is part of a complete sanding system for the angle grinder. When you combine 3M™ Cubitron™ II discs with our powerful 3M™ electric angle grinder and our 3M™ high-performance backing pad with ribbed structure, you are ready for a new level of productivity with less vibration, noise and dust. When these components are used together, they reinforce each other's effectiveness and offer optimum abrasive performance - also in terms of abrasive life, stock removal and consistency. Setting standards across industries. When developing the 3M™ Cubitron™ II fibre disc 982CX Pro, we had your industry in mind. In metalworking, the 982CX Pro does a great job on metals from mild steel to sheet metal. With a wide range of applications in shipbuilding, boatbuilding and metalworking, it masters the challenges specific to your industry. In mechanical engineering, these fibre discs are unbeatable for hard work in agriculture and construction, for industrial machinery, in food processing or for oil and gas plants. Robot technology with maximum efficiency and automated grinding processes are only as efficient as the abrasives used. Leading robotics system integrators around the world rely on 3M™ Cubitron™ II fibre discs for their legendary performance and ability to reduce downtime. The redesigned shaped ceramic grain of the 3M™ Cubitron™ II 982CX Pro fibre disc allows robots to process weld seams and maximise efficiency long after other fibre discs have had to be replaced. Applications in focus - Weld removal - Chamfering - Grinding - Heavy deburring - Robotics and other automated applications
Contents: 25 piece (€3.43 / 1 piece)
Mirka oil sanding set Ultimax Ligno - Professional sanding & oil finishing kit for wood (KIT2416WOMDE)
Ultimate wood preparation - sanding & oiling in one set With the Mirka Ultimax Ligno oil sanding kit (KIT2416WOMDE), you get a professional complete set for the optimum preparation and finishing of wooden surfaces. The kit combines highly developed sanding technology with efficient oil application pads - ideal for workshops, carpenters, parquet layers and demanding DIY enthusiasts. Highly suitable and tested with Rubio Monocoat and Hesse Lignal wood oil Why this set? - Advantages & highlights 1. Perfectly prepared woodThe Ultimax® Ligno sanding discs included have been specially developed for wood. They deliver a high removal rate, work evenly and produce a clean sanding pattern - ideal for further treatment with wood oil. 2. Innovative hourglass patternThe patented grit structure ensures faster work, even material removal, reduced heat development and a significantly longer service life. 3. Maximum dust extractionThe Mirka multifit hole pattern and fine dust channels efficiently remove sanding dust. The result: a cleaner working environment and a permanently efficient sanding surface. 4. Elastic & resistantThanks to latex impregnation, the discs remain flexible, tear-resistant and resistant to edge damage - even during demanding sanding work. 5. Perfect oil applicationThe Oiling Pads distribute wood oil evenly, streak-free and seamlessly. The sealing pads improve control and ensure a clean, even application. Scope of delivery 1× Ultimax Ligno 150 mm Grip Multifit P180 (100 pieces)1× Ultimax Ligno 150 mm Grip Multifit P120 (100 pieces)1× Oiling pad 150 mm (10 pieces)1× Sealing pad 150 mm (5 pieces) Ideal for -Solid wood -Furniture construction -Parquet & floorboards -Worktops -Interior fittings -Workshops & professional surface finishing
Repair Care sandpaper (PU: 25 discs)
Repair Care sandpaperContents25 discs
Contents: 25 piece (€0.00 / 1 piece)
3M Cubitron II Hookit™ grinding disc 737U, 150 mm, multihole
DetailsFeatures 3M precision grain technology, which provides at least 30% faster stock removal and 30% longer life than other conventional ceramic abrasives due to the triangular shaped abrasive grainsThe extremely sharp precision-moulded grain offers a longer service life than conventional ceramic abrasivesSharper cutting surfaces mean less grinding pressure requiredMultihole perforation provides excellent dust extraction3M Hookit hook and loop attachment allows for quick disc changesThe abrasive discs offer long life, high stock removal and are available in a wide range of grit sizesThe 3M Cubitron II Hookit 737U abrasive disc features the latest 3M technology for automotive repair. Its durable, triangular shaped abrasive grain and multihole perforation ensure excellent dust extraction and a particularly long service life. The comprehensive range of available grits includes discs for coarse car body work through to fine sanding of transition areas. The 3M Hookit system enables quick disc changes.Use the 3M Cubitron II Hookit 737U sanding discs for removing paint, sanding filler, sanding edges and even removing the surface texture of clear coats and preparing transition areas. 3M has designed the 3M Cubitron II Hookit 737U abrasive discs to provide superior removal and long life in these essential steps in the body repair process. They feature 3M precision grain technology. This triangular shaped abrasive grit offers 30% greater stock removal and at least 30% longer life than conventional ceramic abrasives. With a wide range of grit sizes available, this disc is ideal for a wide range of car repair sanding applications. The Cubitron II products have once again raised the bar for high-performance abrasives. The multihole perforation of our abrasive disc ensures excellent dust extraction and thus contributes to an even higher removal rate and service life. The 3M Cubitron II Hookit 737U sanding discs can be attached to a backing pad with Velcro fastening and then removed cleanly and easily. They can also be reused over and over again for the entire service life of the abrasive. When used together with a 3M machine sanding disc, the holes in the disc do not need to be aligned with the holes in the backing pad. This enables quick, easy and convenient disc changes.Contents50 pieces
Contents: 50 piece (€1.08 / 1 piece)
3M™ Cubitron™ 3 cutting disc, 87963, 36+, T42, 125 mm x 2.5 mm x 22.23 mm, EN, 25/pack
DetailsFUNCTIONAL SPECIALIST: Produces perpendicular cuts with the outer edge of the disc, making it ideal for cutting metal, including body or marine sheet metal, stainless steel pipes, exhaust pipes, clamps, rusted fasteners and more.IMPROVED SPEED: Delivers up to 10% increased cutting speed compared to 3M™ Cubitron™ II abrasives to reduce the time and pressure needed to get the job done.LESS CHANGE: Removes up to 3x more material compared to 3M™ Cubitron™ II abrasives.LONG LIFE: Engineered to last up to 2x longer than leading competitors.REVISED 3M PRECISION SHAPED Grit: 3M has re-engineered the precision shaped ceramic triangular grit, using proprietary advances in grit shape and molecular bonding technology to create angular structures that continuously break into new sharp grit points. As a result, it wears evenly and runs cool with optimal mineral breakdown.The 3M™ Cubitron™ 3 cutting disc produces vertical cuts using the outer edge of the disc. It is therefore ideal for cutting metal, including stainless steel pipes, exhaust pipes, clamps, rusted fasteners and more. The 3M™ Cubitron™ 3 cut-off wheel uses the re-engineered 3M Precision Moulded Grain, which utilises proprietary micro-fragments of molecular bond technology. Their structure is designed to break off continuously during the grinding process to form sharp points. These clean, sharp edges ensure that the abrasive provides faster, cooler stock removal and longer life than conventional abrasives. 3M™ Cubitron™ high performance abrasives are designed for professional sanders who expect more from their equipment. So experience the next generation of grinding performance with the 3M™ Cubitron™ 3 abrasive disc.The 3M™ Cubitron™ 3 cut-off wheel offers next-generation performance, with over 100 years of 3M innovation in metalworking. Like other 3M industrial abrasives, this disc is designed for a variety of applications, including cutting the toughest metals. It is also designed to perform better at high speeds. Therefore, a tool that maintains speed is crucial. Realise its full potential by pairing it with a powerful and durable 3M angle grinder for improved performance and durability in demanding industrial conditions. Always remember to use a tool guard and not to exceed the maximum operating speed indicated on the disc. 3M has everything you need to equip your workforce with industry-leading solutions so you and your team are prepared for any challenge that comes your way.
Contents: 25 piece (€6.69 / 1 piece)
3M™ Fibre disc 787C, 125 mm x 22 mm, 120+
DetailsFast grinding of metals such as stainless steel and high-nickel alloysReliable performance at medium and low contact pressure120+ grit for finer sanding requirementsAttractive price-performance ratioFor the stainless steel sectorThe 3M™ fibre disc 787C is ideal for everyday use of fibre discs without compromising on performance and economy. Achieve excellent service life and removal results for stainless steel up to grit size 120+, especially at low and medium pressure. The special design of this fibre disc ensures low temperature development on stainless steels, which are known for their poor thermal conductivity.Use the 787C fibre disc for increased performance when grinding stainless steel and high-alloy steels compared to conventional fibre discs. Thanks to their extremely high cutting performance, these fibre discs are an excellent choice for removing weld seams, blending and surface finishing of stainless steel or alloys with a high nickel content. The 787C fibre disc contains precision-formed abrasive grain, which is required to achieve very short processing times and long tool life in demanding applications from grinding to deburring. The product contains a grinding aid on the grain side to keep the workpiece cool and the grinding disc lasts longer. The disc consists of a rigid fibre backing, a strong resin bond and the abrasive coating, which ensures durability and wear resistance. Thanks to this structure and the combination with precision-moulded abrasive grain, more parts per disc can be processed faster and much cooler, and fewer disc changes are required.Content: 25 pieces
Contents: 25 piece (€2.40 / 1 piece)
3M™ Cubitron™ II fibre disc 987C, 125 mm x 22 mm, 80+, slotted
DetailsIntegrated grinding aid reduces the grinding temperature for heat-sensitive alloys and thus extends the service life, e.g. for stainless steelThe rigid fibre backing and strong resin bond ensure durability and wear resistance in heavy-duty sanding applications.Contains 3M precision-moulded abrasive grain, grinds significantly cooler and longer than competitor products, allowing you to increase the processing rate.Integrated grinding aid reduces grinding temperature on heat-sensitive alloys, extending service life.First choice for stainless steelThe 3M™ Cubitron™ II fibre disc 987C offers a higher removal rate and longer service life than other fibre and grinding discs. Our abrasive discs are equipped with 3M precision-formed abrasive grain combined with a stiff fibre backing for higher productivity in medium and heavy stock removal applications.Use the 3M™ Cubitron™ II Fibre Disc 987C to achieve exceptionally high removal rates at lower contact pressure and allow for maximum operator comfort on demanding tasks. Our high-performance discs are ideal for removing weld seams and for chamfering, grinding and blending. An integrated grinding aid makes the grinding disc an excellent product for all types of metal. It ensures cooler grinding on stainless steel and heat-sensitive metals such as nickel alloys and titanium, reduces tarnishing and oxidation of the metal and also reduces the likelihood of heat-induced stress cracking. As a result, our grinding discs are superior to competitor products in terms of service life and performance. The abrasive discs contain 3M precision-formed abrasive grain that forms triangular points that cut the metal rather than gouge or "plough" through it like conventional abrasives. These points break off and continuously self-sharpen, enabling extremely fast cutting. Our discs have a robust, rigid backing made of vulcanised fibre, which is wear-resistant and can cope with demanding grinding applications. They are ideal for removing mill scale, pitting and imperfections.
Contents: 25 piece (€3.12 / 1 piece)
3M Hookit flexible grinding disc 270J, 150 mm, 15 holes, P1500, 34423
DetailsHigh flexibility and mouldabilityFirst-class quality ensures a uniform, even surface quality for every applicationReduced risk of sanding through when sanding thinly coated surfacesAvailable in different grit sizes for excellent precision results3M Hookit mounting system enables easy replacement and optimises disc life3M™ Hookit™ Flexible Sanding Discs are precision coated with high quality minerals and resins to provide long-lasting performance for sanding applications from the first to the last sanding. Our versatile discs offer excellent stock removal performance with high flexibility and dust resistance.Opt for excellent precision results with the 3M™ Hookit™ Flexible Sanding Disc. Our discs are suitable for machine or manual use - for wet or dry sanding. They deliver the removal rate of a conventional abrasive with added malleability and greater flexibility to minimise the risk of sanding through. Precision coated with high quality minerals and resins, they offer long-lasting performance when sanding fillers and removing imperfections when working on surface finishes. Thanks to our Hookit™ fastening system, the discs can be changed quickly and used for a long time.Contents25 discs
Contents: 25 piece (€3.15 / 1 piece)
3M Cubitron II cutting discs, 75 mm x 1 mm x 10 mm, 33456
DetailsHigh cutting rateIncrease the productivity and efficiency of your workshopLong lasting performanceCuts most materials, including high-strength steelOur 3M Cubitron II cut-off wheel is a disc for straight cutting of materials such as body panels, frame members, exhaust pipes, brackets and rusted fasteners.Increase the productivity and efficiency of your workshop with the 3M Cubitron II cut-off wheel. Our rigid, reinforced cut-off wheel cuts almost all materials, including high-strength steel, stainless steel and structural steel. Increase productivity and efficiency with our 3M Cubitron II cut-off wheel with its excellent cutting properties and long service life. It should be used together with a guard that matches the size of the cutting disc.Contents5 discs
Contents: 5 piece (€7.06 / 1 piece)
3M Cubitron II serrated lock washer 967A, 115 mm x 22 mm, 40+, conical
DetailsDesigned to grind faster and last longer with 3M precision moulded abrasive grainLow grinding temperature reduces tarnish and oxidation of the metal as well as heat-induced stress crackingFlap discs can grind and blend in a single step, so they can often replace fibre and roughing discs.The durable heavy Y-viscose backing is characterised by controlled, even wear and therefore enables full utilisation in applications with medium to high contact pressure.Integrated grinding aid reduces the grinding temperature on heat-sensitive alloys and thus extends the service life.The 3M Cubitron II flap disc 967A impresses with its exceptional removal rate at low to medium contact pressure. It is ideal for flat areas and outer edges, especially when high surface quality and edge stability are required.Thanks to 3M precision-moulded abrasive grain, the disc cuts metal particularly efficiently. The self-sharpening, triangular tips ensure fast, even sanding with less effort. This allows weld seams, edges and rust to be removed effortlessly and blending and deburring work to be carried out efficiently.The integrated heat-activated grinding aid reduces tarnishing, oxidation and stress cracks - ideal for stainless steel, nickel alloys and titanium. The robust Y-viscose backing ensures even wear without premature blunting, which extends the service life.The overlapping flap design continuously exposes fresh abrasive mineral. This enables higher productivity as sanding and finishing are carried out in one step. The flap disc replaces conventional fibre discs and bonded abrasives, saving time and money.Advantages of the 3M Cubitron II flap disc 967AHigh removal rate at low pressureSelf-sharpening abrasive grains for consistent performanceCool grinding on stainless steel & heat-sensitive metalsLonger service life thanks to robust backingPerfect for angle grindersContent10 discs
Contents: 10 piece (€7.13 / 1 piece)
3M™ Hookit™ Purple grinding disc 260L, 17 holes, 150 mm, P800, 34781
DetailsAbrasion of orange peel, inclusions or tears on all car paintsAluminium oxide abrasive mineral for fast cutting and long disc lifeSanding of the paint area before it is paintedAvailable in numerous grit sizes and perforationsThe 3M™ Hookit™ 260L+ Purple sanding disc is suitable for colour matching before painting. The disc can also be used to easily remove inclusions or orange peel.Use the 3M™ Hookit™ 260L+ Purple sanding disc for even finish results - our sanding discs are made of fast-grinding and robust mineral abrasive made of aluminium oxide. The discs are ideal for sanding clearcoat and removing dust inclusions or orange peel before applying new paint or polishing the paint. The discs can be easily removed from the backing pads. They are quicker and easier to use than matting discs and are faster and cleaner than products for wet sanding applications. Use the discs for sanding the paint area before it is painted.
Contents: 50 piece (€1.87 / 1 piece)
Scotch-Brite™ Clean and Finish non-woven disc CF-DC, 150 mm, A VFN
DetailsConformable pad gets into corners and over contoured surfaces to create an even surfaceOpen fleece construction withstands stress and rinses clean with repeated use3D non-woven structure ensures long life and even surfacesScotch-Brite™ Clean and Finish non-woven discs combine conformable material and abrasive mineral to produce a clean, even finish without under-sanding or damaging the base material. Our clean and finish discs are flexible, allowing them to effectively reach hard-to-reach areas and produce consistent surface results.The resin-bonded Clean and Finish non-woven material generates the most even, reproducible finishing results. Its versatility makes it a universal disc for most standard applications.Content: 10 pieces
Contents: 10 piece (€2.16 / 1 piece)
Scotch-Brite™ Deburr and Finish Pro compact disc DP-UW, 152.4 mm x 3.175 mm x 25.4 mm, 9C XCRS+
DetailsUse a compact grinding disc with a longer service lifeFaster deburringA soft, strong and smooth grinding disc with easily adjustable processing optionsThe Scotch-Brite™ Deburr and Finish PRO compact deburring and finishing disc uses 3M precision-moulded, nylon-bonded grains to deliver increased grinding performance and tool life for deburring and blending applications. Our pressed compact discs are soft but as wear resistant as iron to minimise disc changes.Use the Scotch-Brite™ PRO compact disc for high grinding performance and long life in deburring and finishing applications. Our smooth-running pressed compact discs remove burrs quickly and cleanly. They are soft to prevent damage, but as strong and wear-resistant as iron and therefore need to be replaced less frequently. They are manufactured with precision-moulded ceramic abrasive grains bonded to a nylon mesh. The hardness of the ceramic material in combination with the self-sharpening grain extends the service life and work can be carried out more quickly without compromising the desired smooth result or the adjustable processing with Scotch-Brite abrasive discs. The PRO compact discs for deburring and finishing are ideal for OEM and pipework renovation and maintenance. These robust high-performance grinding discs reliably remove dirt, corrosion deposits and other contaminants without stressing or impairing the thread form. This means that pipework can be put back into operation more quickly.
3M™ Hookit™ Soft Interface Pad, 150 mm x 10 mm, Multihole, 51127
DetailsSoft foam moulds to contours for a high-quality finishAdditional strength of the backing pad for better sanding results on surfaces and edgesEasy application between Hookit™ sanding discs and Hookit™ backing pads for quick changeoverHole configurations for dust extraction from the work surface and extended disc lifeFeaturesWith the 3M™ Hookit™ Interface Pad Soft you maximise vibration damping and deformability when sanding vehicle parts. Place the 3M™ Hookit™ Interface Pad Soft between Hookit™ sanding discs and Hookit™ backing pads for quick replacement.Use the 3M™ Hookit™ Interface Pad Soft for smoother and higher quality finish results. When used between our Hookit™ backing pads and Hookit™ sanding discs, the 3M™ Hookit™ Interface Pads Soft provide additional cushioning and deformability for sanding processes that require maximum precision on uneven surfaces. In addition, vibrations that frequently occur when using random orbital sanders are dampened, which also has an effect on the quality of the surface finish.Content1 piece
3M Cubitron II Hookit film disc 775L, 150 mm, multihole
The 3M Cubitron II Hookit film disc 775L combines the patented precision ceramic grain with a robust film carrier, setting new standards in eccentric grinding. The particularly tear-resistant film carrier offers optimum grain support and edge stability. At the same time, the innovative spiral perforation (mulithole) ensures optimum dust extraction. This sanding disc stands for aggressive stock removal, fast sanding, long service life and even surfaces.This film disc with Hookit hook and loop adhesion is the superior alternative to conventional hook and loop discs - simply because it does so much more! The 3M™ Cubitron II Hookit film disc 775L is ideal for paint, wood, plastic and metal processing.DetailsFilm backing offers optimum grain support and edge stabilityIncreased productivity, significantly higher performance than comparable hook and loop discsLonger service life with consistent removal rateEconomical thanks to long service life and efficient workAggressive stock removal and fast sandingContents50 pieces
Contents: 50 piece (€1.08 / 1 piece)
3M™ Trizact™ Hookit™ fine grinding disc 443SA 3000, 150 mm, 3000, 50414
DetailsThey were designed for reworking sanding marks after sanding with 1500 and 2000 grit and reduce the time required for finishing.Designed for wet sanding only, they offer long life and less clogging than dry sanding.The foam backing ensures excellent control and consistent surface contact.Suitable for hand sanding and machine sanding. When using a random orbital sander, make a minimum of five passes with 50% overlap.With 3M™ Trizact™ Hookit™ 3000 grit flexible sanding strips for paint finishing, less aggressive polishing is required.Unlike traditional finishing, removing sanding marks with 3M™ Trizact™ abrasives can reduce the appearance of holograms, streaks, sanding through and other blemishes caused by more aggressive finishing methods.Allow refinishers to touch up paint scratches with a lighter random orbital sander instead of a heavier polisherAvailable in multiple sizes and formats.With 3M™ Trizact™ Hookit™ 3000 grit fine sanding discs, you reduce polishing effort and the risk of defects. They are used to rework sanding marks after 1500 and 2000 grit sanding, reducing the need for aggressive polishing skins and overall paint finishing time. The patented 3M™ Trizact™ abrasives are designed for consistent removal and long life.Patented 3M™ Trizact™ abrasives are designed for long abrasive life and consistent surface finish. They have unique three-dimensional structures. As these structures wear away, fresh mineral is exposed. This ensures consistent surface finish and longer life. The 3M™ Trizact™ Hookit™ Fine Grinding Discs 3000 reduce the risk of holograms and streaks that can occur during aggressive polishing. When used for wet sanding, they are dust repellent without the loss of productivity caused by aquaplaning, which is often the case when machine sanding wet surfaces. The foam backing ensures excellent control and consistent surface contact. They can be used with a soft interface pad for even better conformability on curved surfaces. When used in conjunction with other 3M™ Trizact™ abrasives and as part of a 3M™ Perfect-It™ finishing process, the overall finishing time can be reduced. The 3M™ Trizact™ Hookit™ 3000 grit fine sanding discs are available in various sizes and formats.Contents15 pieces
Contents: 15 piece (€8.42 / 1 piece)
Scotch-Brite™ Roloc™ Bristle Disc RD-ZB, white, 50 mm x 15.8 mm, P120
DetailsSolid plastic brush with ceramic gritIdeal for cleaning and light deburring applicationsQuick disc change thanks to 3M™ Roloc™ quick-change systemConsistent work results throughout the entire service lifeAdapts to the contours and shapes of the workpiece (bristle length approx. 16 mm)Use on angle grindersThe Scotch-Brite™ Roloc™ Bristle Disc RD-ZB, equipped with the 3M ceramic abrasive grain, works without contact pressure and ensures a constant cleaning effect throughout its entire service life. The 3M™ Roloc™ quick-change system allows the plastic brush to be changed quickly and easily without additional tools. The disc can be detached from the backing pad and attached with a simple twist.Scotch-Brite™ Bristle products offer a high degree of flexibility and durability. The ceramic abrasive mineral bonded in plastic guarantees the best sanding results. The unique design also adapts to highly profiled contours, does not clog and ensures a consistent finish. Unlike wire brushes, no individual wires can come loose and endanger the user. Cleaning, blending, deburring and polishing - Scotch-Brite™ Bristle products offer maximum work safety, flexibility and service life at all times. Expert tip: Pay attention to the application pressure during use. Work with little pressure and allow the bristle end to work. Light contact with the workpiece is sufficient. Excessive pressure drastically reduces the service life.Contents10 pieces
Contents: 10 piece (€9.36 / 1 piece)
3M™ Trizact™ Hookit™ fine grinding disc 443SA 3000, 75 mm, 3000, 50415
DetailsThey were designed for reworking sanding marks after sanding with 1500 and 2000 grit and reduce the time required for finishing.Designed for wet sanding only, they offer long life and less clogging than dry sanding.The foam backing ensures excellent control and consistent surface contact.Suitable for hand sanding and machine sanding. When using a random orbital sander, make a minimum of five passes with 50% overlap.With 3M™ Trizact™ Hookit™ 3000 grit flexible sanding strips for paint finishing, less aggressive polishing is required.Unlike traditional finishing, removing sanding marks with 3M™ Trizact™ abrasives can reduce the appearance of holograms, streaks, sanding through and other blemishes caused by more aggressive finishing methods.Allow refinishers to touch up paint scratches with a lighter random orbital sander instead of a heavier polisherAvailable in multiple sizes and formats.With 3M™ Trizact™ Hookit™ 3000 grit fine sanding discs, you reduce polishing effort and the risk of defects. They are used to rework sanding marks after 1500 and 2000 grit sanding, reducing the need for aggressive polishing skins and overall paint finishing time. The patented 3M™ Trizact™ abrasives are designed for consistent removal and long life.Patented 3M™ Trizact™ abrasives are designed for long abrasive life and consistent surface finish. They have unique three-dimensional structures. As these structures wear away, fresh mineral is exposed. This ensures consistent surface finish and longer life. The 3M™ Trizact™ Hookit™ Fine Grinding Discs 3000 reduce the risk of holograms and streaks that can occur during aggressive polishing. When used for wet sanding, they are dust repellent without the loss of productivity caused by aquaplaning, which is often the case when machine sanding wet surfaces. The foam backing ensures excellent control and consistent surface contact. They can be used with a soft interface pad for even better conformability on curved surfaces. When used in conjunction with other 3M™ Trizact™ abrasives and as part of a 3M™ Perfect-It™ finishing process, the overall finishing time can be reduced. The 3M™ Trizact™ Hookit™ 3000 grit fine sanding discs are available in various sizes and formats.
Contents: 15 piece (€3.84 / 1 piece)
3M™ Trizact™ Hookit™ fine grinding disc 443SA 6000, 150 mm, 6000, 51130
DetailsThey were designed for reworking sanding marks with 3000 grit and reduce the time required for finishing.Designed for wet sanding only, they offer long life and less clogging than dry sanding.Allow refinishers to touch up paint scratches with a lighter random orbital sander instead of a heavier polisher.These 6000 grit fine sanding discs are designed as the next step after sanding with 3M™ Trizact™ 3000 grit discs to further reduce the time required for polishing.Unlike conventional finishing, removing sanding marks with 3M™ Trizact™ abrasives can reduce the appearance of holograms, streaks, sanding through and other blemishes caused by more aggressive finishing methods.By using the 3M™ Trizact™ Hookit™ 6000 grit fine sanding discs, you will spend less time polishing and reduce the risk of imperfections. Use these discs in the next step to touch up scratches with 3000 grit to reduce polishing time. The 3M™ Trizact™ abrasives are designed for consistent stock removal and long life.By using 3M™ Trizact™ Hookit™ 6000 grit fine abrasive discs in paint finishing, refinishers can reduce the time spent using heavy polishing machines while ensuring a fine and consistent surface finish. Use the 3M™ Trizact™ 6000 grit fine sanding discs to touch up 3000 grit scratches on painted surfaces and clear coats. When used for wet sanding, they are dust-repellent without the loss of productivity caused by aquaplaning, as is often the case when machine sanding wet surfaces. The foam backing ensures excellent control and consistent surface contact. Can be used with a soft interface pad for even better conformability on curved surfaces. Their patented three-dimensional abrasive structures wear away, exposing fresh, sharp mineral - continuously refreshing the abrasive and ensuring fast stock removal and long life. When used in conjunction with other 3M™ Trizact™ abrasives and as part of a 3M™ Perfect-It™ paint finishing system, the overall finishing time can be reduced.
Contents: 15 piece (€7.62 / 1 piece)
Mirka Mirlon non-woven abrasive discs Ø 150 mm
Areas of application Mirlon non-woven abrasive discs with a diameter of 150 mm are particularly suitable for sanding surfaces that are to be treated with top coat, primed or painted due to their three-dimensional structure. The result achieved with Mirlon offers a uniform sanding pattern. Mirlon is mainly used for processing wood and metal . However, it is also widely used in the automotive and marine industries as well as in the painting sector and in drywall construction. Scope of delivery 1 pack of 10
Contents: 10 piece (€2.11 / 1 piece)