Rubio Monocoat Oil Plus 2C (A+B)
€64.99
Available immediately, delivery time: 1-3 working days
Colour and protection in a single coat
Rubio Monocoat Oil Plus 2C (A+B) is a high-quality two-component wood oil for untreated timber in interior applications. The oil colours and protects the wood in a single application, making it ideal for anyone seeking a natural wood finish, high durability and time-saving application.
Whether it’s a wooden floor, table top, staircase, piece of furniture or worktop: Oil Plus 2C ensures an even, attractive finish without forming a thick layer. The wood retains its natural look and feel, whilst being reliably protected. The product is particularly effective wherever high-quality results are required and multiple coats are not an option.
Why Oil Plus 2C is so popular
- Colours and protects in just one coat
- Very economical, covering approx. 30–50 m²/L
- 0% VOC, contains no water or solvents
- Natural finish without overlaps or brush marks
- Suitable for many types of wood and interior surfaces
- Cures faster and is more resistant to abrasion, water and heat
Particularly well suited to these projects
Rubio Monocoat Oil Plus 2C is an excellent choice for joiners, carpenters, parquet layers, interior fitters and discerning DIY enthusiasts. The product is particularly suitable for highly visible wooden surfaces where aesthetics and everyday practicality must go hand in hand – for example, dining tables, kitchen worktops, stair treads, bathroom furniture, built-in furniture and wooden floors.
The oil is also ideal for projects with high quality standards: according to the manufacturer, it has been tested for safe food contact, and treated wood is even suitable for children’s toys in accordance with EN 71-3. This instils confidence in surfaces that are regularly touched or subject to heavy use.
Practical tip on colour selection
If you wish to achieve as raw and light a wood look as possible, Natural or White 5% are often the better choice for light woods. Although Pure contains no pigment, it can slightly warm or darken the wood due to the natural hue of the linseed oil. It is always best to test on the original wood.
Container sizes & coverage
To ensure you don’t order too little or too much, here is a practical guide to standard container sizes :
| Containers | Approx. coverage | Recommended for |
|---|---|---|
| 390 ml | approx. 15 m² | small furniture, table tops, stair treads, small batches, Test projects |
| 1.3 litres | approx. 52 m² | several pieces of furniture, larger tables, kitchens, small to medium-sized floor areas |
| 3.5 litres | approx. 140 m² | larger floor areas, extensive interior finishing projects, workshops and commercial premises |
Note: Actual coverage depends on the type of wood, sanding, absorbency and working method. Consumption may be higher on highly absorbent woods.
Application at a glance
- Prepare the surface : Sand the wood clean and remove all dust thoroughly. For furniture, stairs and worktops, a final sanding of 100–150 grit is standard; for floors, 100 grit.
- Mix components A + B : Mix in a ratio of 3 : 1 before application and stir thoroughly for 1–2 minutes.
- Apply thinly : Apply the oil evenly, allow to react briefly and remove any excess completely.
- Allow to dry : The surface is dry after approx. 12–24 hours, can be cleaned when dry after 2 days and maintained with water and suitable cleaners after 5 days.
Important notes
- Use only on untreated wood. Old coatings must be completely removed.
- The mixed solution is only workable for around 4–6 hours.
- For full performance, component B should always be used.
- Oil-soaked cloths must be placed in water after use, as there is a risk of spontaneous combustion.
That’s why this wood oil is the first choice for many
If you’re looking for a wood oil for furniture, floors, stairs and worktops that looks natural, offers strong protection and is efficient to apply, Rubio Monocoat Oil Plus 2C (A+B) is a very convincing solution. The combination of a single coat, high coverage, a natural finish and a wide range of colours makes this product a real favourite in professional interior design and high-quality DIY projects.
Goes well with
- Rubio Monocoat Cleaner – for thorough preparation before oiling
- Rubio Monocoat Scrubby Set – for even manual application
- Rubio Monocoat Universal Soap – for regular cleaning of oiled surfaces
- Rubio Monocoat Surface Care – for ongoing maintenance of high-traffic surfaces
Log in
Overview of Colors
Discover the available shades of Rubio Monocoat Oil Plus 2C. The color effect may vary depending on the type of wood and the finish. Please always test on the original wood.
Note: The colors shown are for reference only. The actual color appearance depends on the type of wood, the finish, and the application.
Rubio Monocoat – Innovative and Sustainable Wood Care
Rubio Monocoat is known worldwide for its high-quality oils that protect and color wood in just one coat. Thanks to its innovative molecular bonding technology, it creates a durable bond with the wood fibers – without any excess layers. This preserves the natural look and feel of the wood.
In addition to its easy application, Rubio Monocoat stands out for its sustainability: the products are VOC-free, long-lasting, and available in a wide range of colors – ideal for both indoor and outdoor use. Whether for furniture, floors, or decking, Rubio Monocoat provides wood with reliable and environmentally friendly protection.
Learn more about the brand and discover the full range on our Rubio Monocoat brand page in our shop.
Manufacturer details in accordance with GPSR:
Muylle Facon BV
Ambachtenstraat 58
8870 Izegem, Belgium
E-mail: [email protected]