3M™ PPS™ Series 2.0 Set, Small, 200 μ, 26114

SATA RPS – "The Original" multi-purpose cup system with QCC connection The SATA RPS multi-purpose cup system "The Original" is a professional multi-purpose system for preparing and applying paint. Developed for maximum efficiency and the best surface quality, and valued by professionals worldwide. One cup, three functions Mixing: even colour matching in a sturdy cup with a scale Spraying: use with the spray gun thanks to the QCC connection and a continuous material path Storing: the lid seals tight, so the paint stays airtight until next time Less effort, better performance Flexible lid neck: ideal for overhead work or hard-to-reach areas Clean & secure connection: the screw fitting stops the cup falling off Fast colour change: no cleaning effort thanks to the single-use system Three sizes: 0.3 L, 0.6 L, 0.9 L, plus a UV version (0.6 L) Technical details The system consists of just three parts: cup, lid and strainer, all with a Quick Cup Connector (QCC) for direct mounting on any SATA spray gun. The short material path prevents blockages and makes the spray gun easier to clean. Ideal for Vehicle refinishing & restoration Industrial coating & boat painting Wood protection & furniture restoration Airbrush & decorative finishing Versions 0.3 l 125 µm flat strainer (1202043) 0.6 l 125 µm flat strainer (1202100) 0.9 l 125 µm flat strainer (1202259) 0.6 l 200 µm insert strainer (1202134) 0.9 l 200 µm insert strainer (1202267) 0.3 l 200 µm insert strainer (1202077) UV 0.6 l 125 µm flat strainer (1202142) UV 0.6 l 200 µm insert strainer (1202150) Contents 50x cups, lids and strainers

The liner - rethoughtThe first liner cup from SATA - optimised for SATA. Like SATA RPS, this system also fits all SATA spray guns - without an adapter. Adapters are available for spray guns of other brands. Further advantages: more favourable centre of gravity, easier cleaning, lower weight, less damage to the spray gun.The lid closes doubly securely: it locks reliably and shows at a glance that it is correctly closed. The premium sieves are manufactured and tested separately - this ensures that no particles remain in the sieve. The SATA LCS is the first choice for all professionals in the painting trade who like liner cups - and appreciate SATA quality.Product advantagesSuitable for all SATA spray guns with QCC connection without adapterParticle-free: the premium sievesLid with safety lockLiner (inner cup) made of extra soft and thin material for easy and even paint flowHighly transparent hard cup (outer cup) with complete and detailed scale system for easy mixing; upside-down scale shows the remaining quantity when paintingAvailable in 3 cup sizes: 0.40 litre, 0.65 litre and 0.85 litre

DetailsDeveloped exclusively for use with 3M PPS products. Not compatible with 3M PPS series 2.0 products.Kits include disposable lids with microfilters, inner cups and caps.Available for 3M PPS cups and sleeves in four sizes from 180 ml up to 850 ml for spot repairs up to larger repairs.The 3M PPS paint application system is a complete disposable solution for measuring, mixing, filtering and applying paint.The system allows painters to paint at a constant 90-degree angle regardless of the orientation of the part being worked on (even overhead).Reduces the risk of external contamination, guarantees uniform paint application and reduces paint consumption.The 3M PPS paint application system reduces solvent consumption as well as preparation and cleaning time.Sealing caps enable temporary sealing and protection of non-catalysed paints.3M PPS Lid and Inner Cup Kits (first version not compatible with 3M PPS Series 2.0 items) each contain disposable lids with permanently integrated filters to filter the paint during spraying, inner cups and caps for use with the 3M PPS Paint Processing System. The kits are available in four sizes for large to small repairs. The 3M™ PPS Paint Processing System is a comprehensive painting system that allows the painter to measure, mix, filter and apply paints quickly and easily.The 3M PPS kits with lids and inner cups (first version not compatible with 3M PPS Series 2.0 items) each contain disposable lids, inner cups and caps specifically for use with the 3M PPS Paint Processing System. Each 3M PPS lid has a permanently integrated filter that ensures optimum filtration of the paint during application. Choose from lids with 125 µ filters, often recommended for waterborne paints, or 200 µ filters for traditional solvent-based paints. Always consult your paint manufacturer to use the recommended filter for the specific paint. The lids and inner cups are available in matching sizes for the 3M PPS cups and sleeves (first version) to allow technicians to mix incremental measurements up to 850ml. The following lid and cup sizes are available: 3M PPS kit with lids and inner cups; mini size for use with 3M PPS 180ml cups and sleeves - great for spot touch-ups and paint repairs on one sheet 3M PPS Kit with lids and inner cups Midi size for use with 3M PPS 400ml cups and sleeves - great for paint repairs on 2 sheets 3M PPS Kit with lids and inner cups Standard size for use with 3M PPSStandard size for use with 3M PPS 650 ml cups and sleeves - excellent for paint repairs on 3 sheets 3M PPS Kit with lids and inner cups in large size for use with 3M PPS 850 ml cups and sleeves - ideal for touch-ups and paint repairs on 4 sheets.Contents50 pieces

DetailsThe outer cups support the inner cups for the 3M PPS paint processing system3M PPS as a complete disposable solution for dispensing, mixing, filtering and processing wet materialsProcessing at a constant 90 degree angle, regardless of the orientation of the part to be processed (even overhead).70% less solvent consumption with 3M PPS than with conventional flow cups (up to 90% with PPS and 3M Accuspray )The outer cups support and hold the flexible inner cups of the 3M PPS paint application system. The product is available in four sizes, allowing the painter to quickly and easily dose, mix, filter and process the material to be applied.The 3M PPS outer cups are part of the 3M PPS paint processing system. The outer cups support the flexible 3M PPS inner cups. Our outer cups are available in different sizes for different applications. In contrast to conventional cup systems, the material in the 3M PPS system no longer has to be mixed in additional mixing cups and then transferred through a filter into a paint container. Transfer losses due to the use of mixing cups and filters are therefore eliminated. With the PPS, place the disposable inner cup in the reusable PPS outer cup. Then simply mix the paint in the PPS disposable cup, put on the disposable lid (with built-in filter) and the sealing ring - and the PPS system is complete. After these few simple steps, you can start working.Contents1 piece

The E-D quick sieve system dispenser from Drehkopf enables clean and safe storage of E-D quick sieves. The holder can be easily mounted at the workstation and enables efficient working methods thanks to simple individual removal. Searches and mix-ups are avoided thanks to the storage and colour system.The E-D quick sieve system dispenser provides optimum storage for the paint sieves and prevents soiling so that work can be carried out cost-effectively.Content1 piece