Edge banders
Edgebanders are indispensable tools for anyone looking for a professional and clean finish to their woodwork. They ensure the precise application of edgebands to furniture, panels or shelves and give your projects a clean, even edge. With edge banding, you not only achieve an aesthetically pleasing look, but also protect the edges from wear and moisture.
Our edgebanders are robust and offer precise application. They are perfect for processing different materials such as wood, MDF or plywood. They save time and labour as they deliver fast and even results, ideal for professional carpenters and DIY enthusiasts.
Possible applications for edge banding:
-
Furniture construction: Perfect edges for shelves, cabinets and table tops
-
Wood and panel processing: For clean edges without annoying unevenness
-
Renovations: Give old pieces of furniture a new, high-quality look
Festool PU adhesive natural NAT-KA 65/4 - 578529
Universal adhesive for invisible transitions.PUR hotmelt adhesive in proven industrial quality, dimensions and properties perfectly matched to the CONTURO glue application system.Universal, can be used for all commercially available edgebandingsAlso suitable for free-form shapes and curves thanks to its particularly high initial strengthThread tension-free processingisocyanate-reduced (<0.1%) therefore no further training requiredCaution: use rinsing agent for machine cleaning after work (PU spm 4x-KA 65 rinsing agent, article number 200062)can be stored for max. 12 monthsthe adhesive has a high initial strength, excellent cold elasticity and good solvent resistanceNatural colourPU adhesive packed in airtight tins of 200 g eachChemical base: polyurethane adhesivecontains isocyanates, may cause allergic reactionsCaution! The polyurethane adhesive offered here contains "o-(p-isocyanatobenzyl) phenylisocyanate, diphenylmethane-2,4'-diisocyanate", which means that the adhesive is labelled with the R40 phrase "suspected carcinogenic effect". Due to the Chemicals Prohibition Ordinance (ChemVerbotsV), we are obliged to draw your attention to the hazardous substances in our polyurethane adhesive N° 200056. By purchasing the polyurethane adhesive, you confirm that you are of legal age, that you will use the PU adhesive properly and that you will protect your skin, eyes and mucous membranes from direct contact, e.g. with safety goggles, respiratory protection/mask, disposable gloves. We are trained and tested according to § 5 ChemVerbotsVScope of delivery 4 pieces
Contents: 200 Gramm (€0.39 / 1 Gramm)
Festool rinsing agent PU spm 4x-KA 65 - 200062
Cleaning made easy. Strengths and benefits Built-in reaction stopper Red colouring facilitates differentiation Main areas of application Cleaning the edge bander after using PU adhesive Suitable for for KA 65 Rinsing cartridge for the CONTURO KA 65 edgebander after using natural PU adhesive, PU nat 4x-KA 65 Must be used after processing PU adhesive to prevent the chemical reaction of the PU adhesive in the machine can be stored for max. 12 months packed in tins of 140 g
Contents: 4 Stück (€15.71 / 1 Stück)
Festool KA 65-Plus CONTURO edge bander - 577836
The start of the perfect edge. Strengths and benefits Efficient, simple and clean work and quick colour change thanks to unique cartridge glue system Perfect joint quality with high adhesion thanks to precise glue dosing Clean nozzle system without cleaning effort, safe working thanks to low heating of the appliance housing Melting of the adhesive as required. No boiling, discolouration or loss of quality of the adhesive Easy handling, perfect ergonomics, good view of the workpiece Perfect in the system - embedded in a whole system of accessories and consumables to achieve the perfect edge Main areas of application Edging of panel materials with wood, plastic or laminate edges Edging possible from simple rectangular components to complex free-form shapes Can also be used as a supplement to the processing centre for edging complex free-form and round-form elements Mobile use, for quick reworking of edges on site Stationary use for small series, straight edges, free-form elements and bevelled edge gluing, angles from 0-47° Scope of deliveryGuide table, 4 x EVA glue natural, Systainer SYS3 M 337
Festool additional roller ZR-KA 65 - 499480
Extra cornering capability. Strengths and benefits Simple and tool-free installation by sliding into the recess provided Secure fixing via ball catches Robust rubberised roller, so no damage to the edges No unnecessary waste of force thanks to smooth-running bearings Perfect view of the workpiece thanks to lateral positioning More versatile applications possible as the additional roller can be guided better in tight radii Increases the bending radius of the edges, making it easier to process brittle veneer edges Main areas of application Edging of tight inner radii Edging of 90° inside corners Reliable processing of thick and brittle veneer edges - thanks to the larger bending radius of the edge As an additional pressure zone for difficult edges Suitable for for KA 65 for edging tight radii and mouldings provides additional pressure point when gluing the edge, for stronger pressure of the edge on the panel material
Festool scratch guard LAS-STF-KA 65 - 499892
Protects sensitive surfaces.Strengths and benefitsWith StickFix for quick and easy replacement of the felt pad when dirtyTotal thickness corresponds to the standard overlay, ensuring perfect edge protrusionReplacement with the standard pad using four screwsMain areas of applicationEdging of boards with sensitive decorsSuitable forfor KA 65protects against scratches on sensitive or high-gloss surfacesScope of delivery4 x fixing screws, 3 x felt, SB-packedPerformance without compromise thanks to Festool Service. The direct, practical and comprehensive service for you and your tool.--> Learn more
Contents: 3 Stück (€12.96 / 1 Stück)
Festool edge bander KA 65-Set CONTURO - 577840
The start of the perfect edge. Strengths and benefits Efficient, simple and clean work and quick colour change thanks to unique cartridge glue system Perfect joint quality with high adhesion thanks to precise glue dosing Clean nozzle system without cleaning effort, safe working thanks to low heating of the appliance housing Melting of the adhesive as required. No boiling, discolouration or loss of quality of the adhesive Easy handling, perfect ergonomics, good view of the workpiece Perfect in the system - embedded in a whole system of accessories and consumables to achieve the perfect edge Main areas of application Edging of panel materials with wood, plastic or laminate edges Edging of simple right-angled components through to complex free-form shapes possible Also as a supplement to the processing centre, for edging complex free-form and round-form elements Mobile use, for quick reworking of edges on site Stationary use for small batches, straight edges, free-form elements and bevelled edge gluing, angles from 0-47° Scope of deliveryGuide table, 4 x EVA adhesive natural, edge memory, 20 x StickFix sanding strips garnet 80 x 133 P320, additional roller, sanding block HSK 80 x 133 H, cross-cut device, scraper, scratch protection soleplate with 3 x felt pads, polishing felt, StickFix sanding fleece S 800, polishing agent MPA 5010 OR, Systainer SYS3 M 337
Festool EVA adhesive EVA blk 48x-KA 65 - 200060
The adhesive for perfect results. Strengths and benefits Low consumption thanks to perfect dosing Long open time, allowing the CONTURO to be used at different speeds Also ideal for curves and free-form shapes thanks to high heat tack No stringing and no smearing Refill as required thanks to unique cartridge system Main areas of application For gluing / edging wood, plastic or laminate edges on various panel materials in furniture construction Suitable for for KA 65 unfilled EVA adhesive - perfect joint quality for black decors EVA universal adhesive with high melting point high softening range of approx. 90° C, therefore also suitable for use on objects with higher temperature resistance of -10° C - +75° C Chemical basis: adhesive, resin
Festool replacement felt EF-LAS-STF-KA 65 10x - 499893
Protects sensitive surfaces. Strengths and benefits Quick and easy replacement of the felt pad when dirty Felt is optimised for optimum gliding properties, enabling good guidance of the machine Main areas of application Edging panels with delicate decors Suitable for for scratch protection LAS-STF-KA 65 protects against scratches on sensitive or high-gloss surfaces
Contents: 10 Stück (€3.31 / 1 Stück)
Festool cross brace MFT 3-QT - 495502
Additional stability. Strengths and benefits Perfect bracing of the MFT 3 thanks to the diagonal arrangement of the struts The struts are pre-assembled once, then remain on the MFT and can be fixed in place without tools Sturdy metal strut design The legs of the MFT can still be folded in for transport Main areas of application For frequent work on the MFT that requires lateral force, such as gluing edges with the KA65 edge bander Suitable for for MFT 3 for additional stabilisation of the MFT 3
Festool LP-KA65 MFT/3 perforated plate - 500366
Milling to perfection. Strengths and benefits Perfectly prepared cut-out for the AP-KA 65 adapter plate Sliding strips can be used flexibly thanks to M4 threaded sockets Particularly stable thanks to the use of a 3-layer MDF board Can be easily replaced with the standard perforated plate for existing MFTs Main areas of application With cut-out for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate For small batches, straight edges, free-form elements and bevelled edge banding, angles from 0-47° Sliding plates for secure guidance of the workpiece can be easily screwed on via integrated M4 sockets Suitable for for KA 65 in combination with adapter plate AP-KA 65, enables the machine to be swivelled (0 - 47°) in the table and thus horizontal support of the workpiece during edging - for convenient and safe guidance of even large objects
Festool adapter plate AP-KA 65 - 500175
Swivelling stationary canting. Strengths and benefits Flexible use, the adapter plate can be installed in a self-built table frame or in the MFT perforated plate provided for this purpose Infinitely adjustable angle from 0-47° Enables the machine to be swivelled in the table and thus horizontal support of the workpiece during edging - for convenient and safe guidance of even large objects Sliding guides supplied for safe guidance of the workpiece Perfect edge protrusion when using the sliding guides supplied Quick and tool-free installation and removal of the edge banding unit Secure fixing of the machine using a sliding grid Additional roller as an extension of the pressure zone or for edging complex shapes Adjustable guide stop for precisely parallel feeding of the panel when edging mitres, thus preventing the edge from running Deflector that keeps the inserted edge away from the workpiece area Machine start button always within easy reach Main areas of application For small series of straight edges Edging small free-form elements that are difficult to clamp Bevelled edge gluing up to 47° Suitable for for KA 65 for using the KA 65 edge bander as a stationary device Adapter plate for installation in the MFT (with perforated plate KA 65) or for installation in a separate work table Scope of deliveryAdapter plate for edge bander complete with 15 sliding guides, additional roller, in box
Festool sliding plate GP-MFT/3 KA65 15x
Always well managed.Strengths and benefitsSafe guidance of the workpiece thanks to optimised gliding behaviourPerfect edge protrusion thanks to the coordinated thickness of the slideways to the adapter plateHole pattern optimised for the thread spacing of the MFT perforated plate KA 65 LP-KA 65 MFT/3Can also be fastened with standard wood screws, allowing flexible use on self-made workbenchesMain areas of applicationEdging of components in stationary useBuilding your own worktable for the KA65 edgebanderSuitable forfor AP-KA 65, MFT GP-KA 65 MFT/3Replacement or extension sliding plates for stationary use of the edge bander with adapter plate AP-KA 65 in the MFT (with perforated plate KA 65, order no. 500366) or installed in a separate worktableScope of deliveryM4 screws for fastening, self-service packagingPerformance without compromise thanks to Festool Service. The direct, practical and comprehensive service for you and your tool.--> Learn more
Contents: 15 Stück (€2.26 / 1 Stück)