SATA filter 484 3-stage sinter filter/fine filter/activated carbon, pressure regulator, outlet module (2 x 1/4" external thread) - 92320
€1,583.28
Available immediately, delivery time: 1-3 Werktage
SATA filter 484 3-stage sinter filter/fine filter/activated carbon, pressure regulator, outlet module (2 x 1/4" external thread)
For fresh air-supplied breathing air systems without activated carbon pre-stage and areas with high compressed air quality requirements.
Product information
- The activated carbon filter module reliably protects the painter from harmful vapours and gases
- The microfibre fine filter with a fineness of 0.01 microns ensures a separation efficiency of 99.998% (100% technically clean air) and thus prevents incorrect painting and expensive reworking
- The degree of saturation of the fine filter can be easily read with the double manometer
- Very high air flow rate: 3,600 NL/min at 6 bar
- The cyclone separator reliably removes oil and water from the compressed air
- The automatic condensate drain valve prevents "blow-through" into the compressed air network (low-maintenance)
- The large sintered bronze filter with a fineness of 5 microns has a long service life and is easy to clean
- Robust metal housing so that the combination fine filter unit with activated carbon is suitable for temperatures up to 60°C without any problems
- Air inlet: 1/2 inch
- The pressure can be easily adjusted using the pressure reducer and pressure gauge
- old SATA article number: 224477
SAL-Check: www.sata.com/sal
Warranty registration: www.sata.com/garantieanmeldung
Paint data sheets: www.sata.com/lackdaten
| Execution: | SATA filter 414 | 1-stufiger Sinterfilter (92213), SATA filter 414 | L 1-stufiger Sinterfilter (92254), SATA filter 424 | L 1-stufiger Sinterfilter (92262), SATA filter 434 | 1-stufiger Feinfilter (92239), SATA filter 434 | L 1-stufiger Feinfilter (92270), SATA filter 444 | 2-stufiger Sinter-/ Feinfilter (92296), SATA filter 444 | 2-stufiger Tragerahmen Sinter-/ Feinfilter (92833), SATA filter 464 | 1-stufiger Aktivkohlefilter (92247), SATA filter 464 | 1-stufiger Aktivkohlefilter Nachrüstung (141473), SATA filter 474 | 2-stufiger Sinter-/ Feinfilter (92312), SATA filter 484 | 3-stufiger Sinter-/ Fein-/ Aktivkohlefilter (92320), SATA filter 484 | 3-stufiger Tragerahmen Sinter-/ Fein- / Aktivkohlefilter (129619) |
|---|
Log in
SATA – Spray Guns and Respiratory Protection for Professional Applications
SATA is one of the leading manufacturers of spray guns, respiratory protection systems, and accessories for professional surface finishing. The products are known for precise spray patterns, high manufacturing quality, and ergonomic performance in professional paint environments.
Learn more about SATA and explore the full product range on our SATA brand page in the shop.
Das könnte Sie auch interessieren
UseStorage box for wall mounting with fine filter cartridge (1x) and activated carbon cartridge (1x)Further information can be found at:SATA homepage: www.sata.comSAL-Check: www.sata.com/salWarranty registration: www.sata.com/garantieanmeldungPaint data sheets: www.sata.com/lackdaten
The SATA filter cartridges for the 100 prep filter offer a versatile selection with sintered filter, fine filter and activated carbon cartridge. These high-quality filter cartridges ensure effective cleaning and separation of dirt particles, oil droplets and activated carbon filtration. They have been specially developed for the SATA 100 prep filter and ensure optimum air quality for painting work. Choose the right filter cartridge for your individual requirements and benefit from reliable and efficient filtration. Order the SATA filter cartridges now and optimise your painting results.Further information can be found at: SATA homepage: www.sata.comSAL-Check: www.sata.com/salWarranty registration: www.sata.com/garantieanmeldungPaint data sheets: www.sata.com/lackdaten
The SATA filter 100 series - user-friendly and low-maintenance for the pre-work area. These filters have been specially developed to prevent paint defects right from the start. With effective filtration of the finest dirt particles down to a size of 0.1 µm, they offer reliable protection. The filter stages with cyclone separator, sinter filter, microfibre fine filter and activated carbon ensure maximum safety when processing water-based materials. With automatic condensate drain and precise pressure control valve, they are easy to use. Ideal for temperatures below 50 °C in the preparation area. Discover the SATA filter 100 series now for optimum compressed air quality.For more information, visit: SATA homepage: www.sata.comSAL-Check: www.sata.com/salWarranty registration: www.sata.com/garantieanmeldungPaint data sheets: www.sata.com/lackdaten
The SATA filter cover offers reliable protection for the filter units of the SATA filter 100, 200, 300 and 400 series. With a packaging unit of 4 pieces, it effectively protects against dirt and dust. Order the SATA Filter Cover now to extend the service life of your filter units and ensure optimum filter performance at . Further information can be found at: SATA homepage: www.sata.comSAL-Check: www.sata.com/salWarranty registration: www.sata.com/garantieanmeldungPaint data sheets: www.sata.com/lackdaten
Contents: 4 Stück (€16.55 / 1 Stück)
The SATA filter cartridges offer a wide selection of activated carbon filters, fine filters and sintered filters for the 200/300/400 filter series . highly effective, they remove impurities and ensure clean compressed air in your painting environment. Order the SATA filter cartridges now for reliable filtration and optimum painting results. Further information can be found on the:SATA homepage: www.sata.comSAL-Check: www.sata.com/salWarranty registration: www.sata.com/garantieanmeldungPaint data sheets: www.sata.com/lackdaten